Installing Your Refrigerator
How to Remove and Install the Pullout Drawer
!WARNING
To avoid electrical shock which can cause severe personal injury or death, disconnect power to refrigerator before removing doors. After replacing doors, connect power.
!CAUTION
To avoid possible injury, product, or property damage, you will need two people to perform the following instructions.
Removing Pullout Drawer
1Pull drawer open to full extension. Remove Phillips screw from each side of rail system.
2 Remove lower basket by lifting basket from rail system.
3Pull upper basket out to full extension, and lift out to remove.
4Lift top of door to unhook door supports from rail system. Lift door out to remove.
Installing Pullout Drawer
1Pull both rails out to full extension.
2 Hook door supports into rail tabs, as illustrated, and lower door into final position.
3 With drawer pulled out to full extension, insert lower basket by aligning tabs on both side of lower basket with notches in rail assembly.
4Slide upper basket into unit. Make sure that
rear of basket hooks behind rail catch.
7