Water filter
(in some models)
Your refrigerator may be equipped with an external or internal filter depending on its model. To fit the water filter, follow the instructions below referring to the figures supplied:
Mounting the external filter onto the wall
1.First, determine the location to mount the external filter.
2.Then, determine the distance between the filter and the tap and filter and the water inlet respectively. Prepare hoses at required lengths.
3.Mount the filter connection kit onto the wall by using a screwdriver and attach the filter.
WARNING: Water filter must be hold upright as shown in the figure. It is critical to connect the water inlet and outlet hoses on the filter correctly.
After connecting the filter, do not consume the first 10 glasses of water. WARNING: Never mount the filter onto the refrigerator. Coolant pipes might be pierced!
After connecting the filter, do not consume the first 10 glasses of water. WARNING: Never mount the filter onto the refrigerator. Coolant pipes might be pierced!
13
EN