Smeg A31G7IXIA manual Some good frying tips

Page 13

Instructions for the user

6.6.1 Some good frying tips

The level of oil in the basin must always be between 3 litres (minimum amount indicated inside the basin) and 3.5 litres (maximum amount indicated inside the basin). The resistance cannot operate in the open air: it must always be immersed in the oil or fat.

Do not put solid vegetable or animal fat into the basin. It must already be melted before putting it into the basin.

WARNING: before lifting the resistance up, make sure it is cool. Danger of burns!

WARNING: when the resistance is raised, take care not to activate the control device. Danger of burns!

The ideal frying temperature is between 160°C and 185°C. The oil will degrade very quickly at levels higher or lower than these.

If the temperature is too low, the food is not broiled on the surface and becomes impregnated with fat.

The larger the pieces the longer they have to fry. It is, therefore, a good idea to pick a cooking temperature that allows you to cook the food right through without burning it on the outside.

49

Image 13
Contents Contents Instructions for USE Precautions for useInstructions for Disposal OUR Concern for the Environment Instructions for disposalSafety Instructions Safety instructionsSafety instructions GET to Know Your Appliance Instructions for the userCleaning and Maintenance Before InstallationGas hob Using the HOBPan diameters Practical tips for using the burnersCooking guidelines Glass ceramic hobKnob Position Suitable kind of cooking Barbeque hob Deep fat fryer Some good frying tips When the frying is finished Cooking zones Induction hobHeating accelerator Operating power settingsCookware Residual heat Cookware detector signalCooking hob lock-out Circuit board thermal protectionGlass ceramic hob thermal protection TemperatureWarming function Cleaning stainless steel Cleaning and MaintenanceCleaning the gas components Ordinary daily cleaningCleaning the barbeque plate Cleaning the glass ceramic hobCleaning the deep fat fryer Installing the Appliance Instructions for the installerPositioning in the counter top Fixing to the supporting structureFixing to the electric model support structure Instructions for the installer Do not remove this plate for any reason Electrical connectionConnection to liquid gas GAS ConnectionExtraction of the combustion products Room ventilationAdaptation to Different Types of GAS Replacement of nozzles on the hobLiquid GAS G30/G31 30/37 mbar Burner and nozzle characteristics tableAdjusting the minimum for liquid gas Adjusting the minimum for city and natural gasFinal Operations for GAS Appliances Lubrication of gas taps