Smeg A31G7IXIA manual Cleaning the glass ceramic hob, Cleaning the barbeque plate

Page 22

Instructions for the user

7.3Cleaning the glass ceramic hob

The glass ceramic hob should be regularly cleaned, preferably after every use, once the residual heat warning lights have gone off.

Smudges from aluminium-based pans can be easily cleaned off with a cloth dampened in vinegar. Remove any burnt residues after cooking with the scraper provided; rinse with water and wipe dry with a clean cloth.

Regular use of the scraper considerably reduces the need for chemical detergents for the daily cleaning of the hob. Never use abrasive or corrosive detergents (e.g. cleaning powders, oven sprays, spot-removers and wire sponges).

Never use a jet of steam to clean the appliance.

7.4Cleaning the barbeque plate

After leaving the plate to cool, remove it from its position by lifting it up from the front as shown in figure 1.

Clean it using standard washing up liquid and a soft sponge.

In order to remove the tray under the barbeque resistance:

1Remove the plate as described

2Lift the resistance and block it, sliding the hold to the right (as shown in figure 2/3)

3Remove the basin using the two handles and clean using specific cleaning products for stainless steel and a soft sponge.

1)

2)

3)

WARNING: before lifting the resistance up, make sure it is cool. Danger of burns!

58

Image 22
Contents Contents Precautions for use Instructions for USEInstructions for disposal Instructions for Disposal OUR Concern for the EnvironmentSafety instructions Safety InstructionsSafety instructions Instructions for the user GET to Know Your ApplianceBefore Installation Cleaning and MaintenanceUsing the HOB Gas hobPractical tips for using the burners Pan diametersCooking guidelines Glass ceramic hobKnob Position Suitable kind of cooking Barbeque hob Deep fat fryer Some good frying tips When the frying is finished Induction hob Cooking zonesOperating power settings Heating acceleratorCookware Cooking hob lock-out Cookware detector signalResidual heat Circuit board thermal protectionTemperature Glass ceramic hob thermal protectionWarming function Cleaning the gas components Cleaning and MaintenanceCleaning stainless steel Ordinary daily cleaningCleaning the glass ceramic hob Cleaning the barbeque plateCleaning the deep fat fryer Positioning in the counter top Instructions for the installerInstalling the Appliance Fixing to the supporting structureFixing to the electric model support structure Instructions for the installer Electrical connection Do not remove this plate for any reasonGAS Connection Connection to liquid gasRoom ventilation Extraction of the combustion productsReplacement of nozzles on the hob Adaptation to Different Types of GASBurner and nozzle characteristics table Liquid GAS G30/G31 30/37 mbarFinal Operations for GAS Appliances Adjusting the minimum for city and natural gasAdjusting the minimum for liquid gas Lubrication of gas taps