![](/images/new-backgrounds/1081720/8172077x1.webp)
Other possible problems and their causes:
PROBLEM
The oven will not operate
Burner fails to light
CAUSE
lYou have not set the electronic control correctly. Refer to the section in this manual describing the function you are operating.
lYou have programmed a delayed start time. Wait for the start time to be reached or cancel and reset the control.
lThe range is not plugged into a live outlet with the proper voltage. (See Installation Instructions.)
lYou have blown a household fuse or tripped a circuit breaker. In case of prolonged power failure, manually light burners (see page 9).
l The burner ports are clogged. Clean with a straight pin or a
Burner flames are uneven
Burner flames lift off ports, are yellow, or are noisy when turned off
Burner makes popplng noise when on
l
l
l
brush (see page 34).
The burner ports are clogged. Clean with a straight pin or a brush (see page 34). If this fails, call for service.
The air/gas mixture is incorrect. Contact a service techni- cian to check it.
The burner is wet from washing. Let dry.
continued on next page
39