USING YOUR RANGE
THE ELECTRONIC OVEN CONTROL
Electronic ON
display | HEAT BAKE BROIL LOCK'D CLEAN TIMER |
Oven selector pads
(pp. 13, 15, 16, 17, 22)
|
|
|
|
| TIMER |
|
|
|
|
|
BAKE | CUSTOM | AUTO | TEMP | CLOCK | SET | LIGHT | HR | MIN | START | OFF |
| BROIL | CLEAN |
|
| TIMER |
|
|
| ENTER | CANCEL |
|
|
|
|
| OFF |
|
|
| 5 SEC |
|
Temperature | Clock | Minute | Oven | Hour | Minute | Start/enter | |
pad |
| pad | timer set | light | pads | pads | pad |
| |||||||
(pp. 13, 15, | (p. 11) | and off | pad | (p. 11, | (p. 11, | (pp. 10, 11, | |
16, 17, 22) |
| pads | (p. 28) | 21) | 21) | 12, 14, 16, | |
|
|
| (pp. 11, 12) |
|
|
| 22) |
Off/cancel pad
(pp. 12, 14, 16, 22)
Display/clock
•When you first plug in the range, everything on the display will light up for 1 to 2 seconds, then a time of day and “PF” will appear on the temperature display. Press the off/cancel pad to clear “PF” from the display. If, after you set the clock (see the “Setting the clock” section), “PF” again appears on the display, your electricity was off for a while. Reset the clock, if needed.
•When you are not using the oven, the display will show the time of day.
•When you are using the oven or minute timer, the display will show times, temperature settings, and what command pads have been pressed.
•When showing the time of day, the display will show the hour and minutes.
•When you are using the minute timer, the display will show minutes and seconds in the following sequence:
–For settings from
–For settings 1 hour or over, the display will count down hours and minutes.
Using the control lock
The control lock lets you shut down the control panel command pads. The control lock comes in handy when you want to prevent others from using the oven.
NOTES:
•You can only use the control lock when the oven is not in use or the control has not been set.
•Set the control lock when cleaning the control panel to prevent yourself from accidentally turning on the oven.
•The control lock will stay on even after a power failure.
To lock the control panel:
Press and hold START/ENTER for 5 seconds. You will hear a single tone and “Loc” and
START “LOCK’D” will appear on the temperature ENTER display.
5 SEC
To unlock the control panel:
Press and hold START/ENTER for 5 seconds.
You will hear 3 tones followed by a single START tone. “Loc” and “LOCK’D” will disappear
ENTER | from the temperature display. |
5 SEC |
|
10