Cornelius ICE FROST manual Quarterly Cleaning and Sanitation, Post MIX Systems Operations

Page 16

Ice Frost Operator’s Manual

QUARTERLY CLEANING AND SANITATION

POST MIX SYSTEMS OPERATIONS

ATTENTION: The cleaning operations must be performed with the machine disconnected from the power supply.

1.Empty the bowl of any remaining product and switch off the main switch “M”.

2.Remove the cover (B) - FIGURE 27.

3.Extract the quick couplings (C2) / (F2) - (FIGURE 12, FIGURE 13, and FIGURE 14).

Pre-mix version

Post-mix version

FIGURE 12	FIGURE 13

FIGURE 14

4.Disconnect the probe fastenings (D2) / (E2) - (FIGURE 12 and FIGURE 13).

5.Pull the lockpin/safety pin (Y) upwards - FIGURE 15.

CAUTION: There is a spring below the safety pin. Take caution when removing the pin that the spring does not fall into the unit or eject the pin.

FIGURE 15

Publication Number: M620919596OPR

- 12 -

Image 16

Contents ICE Frost Page Table of Contents Page Important Warnings and Advice Technical DataTransportation Indications Plate DataInstallation Connecting the Electricity MainsConnection Diagrams Ice Frost Generic Pre-mixDescription ConnectionIce Frost Generic Post-mix Inlet for CO2 45 to 60 psi CO2 gas cylinderAlarms Safety Probe Alarms only for ICE Frost Generic Pre-mix1st Filling Time-out Filling Time-outSystem Over Temperature Alarm Corrective Action Filter Cleaning AlarmCondition Bowl Loading Operations Brix Procedure Main Power Switch Auto Timer ButtonProgramming Electronic Touch PAD Auger ON/OFF ButtonOperate in Automatic Mode with Cold Timer Activated Setting Cold Timer Night SettingOperate in Manual Mode without Cold Timer Activated Viewing the Bowl Temperature Consistency AdjustmentQuarterly Cleaning and Sanitation Post MIX Systems OperationsBowl Lid Cap Page Page Special Maintenance Restricted AIR Flow AlarmPressure and Level Control Card General Features Electronic Bowl Monitoring and Safety SystemElectronic Monitoring 1st Filling Condition OFF ConditionSafety Probes only for ICE Frost Generic Pre-mix Managing the Bowl LevelsSumming Up Wiring Diagram Vfcb POST-MIX 115V/60HZ Vfcb PRE-MIX 230V/50HZ Vfcb POST-MIX 230V/50HZ Troubleshooting Problem Possible Cause SolutionProblem Product Brix/ratio is too lowProblem Possible Cause Solution IMI Cornelius Inc

ICE FROST specifications

Cornelius ICE FROST is a revolutionary ice dispensing solution that has redefined the way the foodservice industry approaches ice production and distribution. Designed for high-capacity environments, such as restaurants, hotels, and convenience stores, the ICE FROST system delivers consistent, high-quality ice while maximizing efficiency and reliability.

One of the standout features of the ICE FROST is its innovative ice-making technology. The system uses a unique air-cooled condenser coupled with a high-efficiency compressor, allowing it to operate effectively at varying ambient temperatures. This means that regardless of the conditions in the kitchen or service area, the ICE FROST ensures a steady supply of ice, minimizing the risk of downtime during peak hours.

In terms of capacity, the ICE FROST can produce a substantial amount of ice daily, tailored to meet the demands of busy establishments. Typically, it can generate up to 1,000 pounds of ice per day, depending on the specific model and configurations. This high output is complemented by a spacious storage bin that holds significant quantities of ice, reducing the frequency of refills and allowing for uninterrupted service.

Another key characteristic of the ICE FROST system is its user-friendly interface. The intuitive controls enable easy operation and allow staff to monitor production levels effortlessly. The machine is also designed for easy access and maintenance, with features such as removable panels and a self-cleaning option that simplifies the upkeep process. This focus on user experience not only enhances operational efficiency but also extends the lifespan of the equipment.

Energy efficiency is a major consideration for the modern foodservice establishment, and the ICE FROST excels in this area. With industry-leading energy consumption ratings, it helps businesses reduce operating costs while maintaining optimal productivity. Furthermore, its eco-friendly refrigerants align with contemporary sustainability practices, making it a responsible choice for environmentally conscious operators.

In conclusion, Cornelius ICE FROST stands out as a versatile, efficient, and reliable ice dispensing solution. Its combination of high production capacity, advanced technology, user-centric design, and energy efficiency makes it an essential asset for any foodservice operation. Whether used for beverages, food preservation, or other applications, the ICE FROST system ensures that businesses can meet the ice demands of their customers without compromise.