Cornelius ICE FROST Important Warnings and Advice, Technical Data, Transportation Indications

Page 5

Ice Frost Operator’s Manual

IMPORTANT WARNINGS AND ADVICE

This instruction manual represents an integral part of the equipment and must be kept readily available for use.

Read the warnings contained herein carefully before installing and using this equipment.

In addition to offering information concerning routine maintenance for the ice slush drinks machine and technical back-up for troubleshooting, this manual aims to help the user make the most of the machine’s potential, adapting it to suit the specific needs of the various countries it will be used in.

Modifications or attempts to modify the equipment will not only result in the forfeiture of the guarantee, but are also extremely dangerous.

The maintenance operations must be carried out by qualified professionals. Never attempt to repair the machine yourselves as the intervention of non-qualified persons, as well as being hazardous, could also lead to serious damage to the machine.

TECHNICAL DATA

PLATE DATA

The voltage and the frequency are indicated on the serial number plate, located on the refrigeration deck and the right hand side near the controls.

TRANSPORTATION INDICATIONS

To prevent the oil contained in the compressor from flowing out into the cooling circuit, the equipment must be transported, stored, and handled in a vertical position, as per the indications given on the packing.

The wooden pallet, equipped with housing for the lifting forks, allows the packed equipment to be moved using normal handling and hoisting means.

© 2004-2006, IMI Cornelius Inc.

- 1 -

Publication Number: M620919596OPR

Image 5
Contents ICE Frost Page Table of Contents Page Technical Data Important Warnings and AdviceTransportation Indications Plate DataConnecting the Electricity Mains InstallationIce Frost Generic Pre-mix Connection DiagramsDescription ConnectionInlet for CO2 45 to 60 psi CO2 gas cylinder Ice Frost Generic Post-mixSafety Probe Alarms only for ICE Frost Generic Pre-mix Alarms1st Filling Time-out Filling Time-outCondition Filter Cleaning AlarmSystem Over Temperature Alarm Corrective Action Bowl Loading Operations Brix Procedure Auto Timer Button Main Power SwitchProgramming Electronic Touch PAD Auger ON/OFF ButtonOperate in Manual Mode without Cold Timer Activated Setting Cold Timer Night SettingOperate in Automatic Mode with Cold Timer Activated Consistency Adjustment Viewing the Bowl TemperaturePost MIX Systems Operations Quarterly Cleaning and SanitationBowl Lid Cap Page Page Restricted AIR Flow Alarm Special MaintenanceElectronic Monitoring Electronic Bowl Monitoring and Safety SystemPressure and Level Control Card General Features OFF Condition 1st Filling ConditionManaging the Bowl Levels Safety Probes only for ICE Frost Generic Pre-mixSumming Up Wiring Diagram Vfcb POST-MIX 115V/60HZ Vfcb PRE-MIX 230V/50HZ Vfcb POST-MIX 230V/50HZ Problem Possible Cause Solution TroubleshootingProduct Brix/ratio is too low ProblemProblem Possible Cause Solution IMI Cornelius Inc

ICE FROST specifications

Cornelius ICE FROST is a revolutionary ice dispensing solution that has redefined the way the foodservice industry approaches ice production and distribution. Designed for high-capacity environments, such as restaurants, hotels, and convenience stores, the ICE FROST system delivers consistent, high-quality ice while maximizing efficiency and reliability.

One of the standout features of the ICE FROST is its innovative ice-making technology. The system uses a unique air-cooled condenser coupled with a high-efficiency compressor, allowing it to operate effectively at varying ambient temperatures. This means that regardless of the conditions in the kitchen or service area, the ICE FROST ensures a steady supply of ice, minimizing the risk of downtime during peak hours.

In terms of capacity, the ICE FROST can produce a substantial amount of ice daily, tailored to meet the demands of busy establishments. Typically, it can generate up to 1,000 pounds of ice per day, depending on the specific model and configurations. This high output is complemented by a spacious storage bin that holds significant quantities of ice, reducing the frequency of refills and allowing for uninterrupted service.

Another key characteristic of the ICE FROST system is its user-friendly interface. The intuitive controls enable easy operation and allow staff to monitor production levels effortlessly. The machine is also designed for easy access and maintenance, with features such as removable panels and a self-cleaning option that simplifies the upkeep process. This focus on user experience not only enhances operational efficiency but also extends the lifespan of the equipment.

Energy efficiency is a major consideration for the modern foodservice establishment, and the ICE FROST excels in this area. With industry-leading energy consumption ratings, it helps businesses reduce operating costs while maintaining optimal productivity. Furthermore, its eco-friendly refrigerants align with contemporary sustainability practices, making it a responsible choice for environmentally conscious operators.

In conclusion, Cornelius ICE FROST stands out as a versatile, efficient, and reliable ice dispensing solution. Its combination of high production capacity, advanced technology, user-centric design, and energy efficiency makes it an essential asset for any foodservice operation. Whether used for beverages, food preservation, or other applications, the ICE FROST system ensures that businesses can meet the ice demands of their customers without compromise.