Estate 2316077B Refrigerator Doors, Connect to Refrigerator Style, Complete the Installation

Page 5

8.Place the free end of the tubing in a container or sink, and turn ON the main water supply. Flush the tubing until water is clear. Turn OFF the shutoff valve on the water pipe. Coil the copper tubing.

6.The ice maker is equipped with a built-in water strainer. If your water conditions require a second water strainer, install it in the ¹⁄₄" (6.35 mm) water line at either tube connection. Obtain a water strainer from your nearest appliance dealer.

Connect to Refrigerator

NOTE: On kit models, assemble water valve to refrigerator per kit instructions.

Style 1

1.Unplug refrigerator or disconnect power.

2.Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten.

3.Use the tube clamp on the back of the refrigerator to secure the tubing to the refrigerator as shown. This will help avoid damage to the tubing when the refrigerator is pushed back against the wall.

4.Turn shutoff valve ON.

5.Check for leaks. Tighten any connections (including connections at the valve) or nuts that leak.

A

B

C

D

A. Tube clamp

C. Compression nut

B. Copper tubing

D. Valve inlet

6.The ice maker is equipped with a built-in water strainer. If your water conditions require a second water strainer, install it in the ¹⁄₄" (6.35 mm) water line at either tube connection. Obtain a water strainer from your nearest appliance dealer.

Style 2

1.Unplug refrigerator or disconnect power.

2.Disconnect the tube clamp on the back of the product and insert the copper tubing through the clamp as shown.

3.Attach the copper tube to the valve inlet using a compression nut and sleeve as shown.

4.Tighten the compression nut. Do not overtighten. Reattach the tube clamp and tube to the back of the cabinet.

A

B

C

A. Tube clamp

C. Compression nut

B. Copper tubing

5.Turn shutoff valve ON. Check for leaks. Tighten any connections (including connections at the valve) or nuts that leak.

Complete the Installation

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Plug into a grounded 3 prong outlet.

NOTE: Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced. Allow 3 days to completely fill ice container.

Refrigerator Doors

TOOLS NEEDED: ⁵⁄₁₆" hex-head socket wrench, #2 Phillips screwdriver, flat-blade screwdriver, ⁵⁄₁₆" open-end wrench, flat 2" putty knife.

IMPORTANT:

Before you begin, turn the refrigerator control OFF. Unplug refrigerator or disconnect power.

Remove food and adjustable door or utility bins from doors.

If you are only removing and replacing the doors, see the “Remove Doors and Hinges” and “Replace Doors and Hinges” sections.

Depending on your model, you may have standard (Style 1) or contoured (Style 2) doors. If you are also going to reverse the door swing, follow the instructions for the appropriate door style.

Remove Doors and Hinges

⁵⁄₁₆" Hex-Head Hinge Screw

1.Unplug refrigerator or disconnect power.

2.Close the refrigerator door and keep both doors closed until you are ready to lift them free from the cabinet.

NOTE: Provide additional support for the doors while the hinges are being moved. Do not depend on the door magnets to hold the doors in place while you are working.

3.Remove the parts for the top hinge as shown in Top Hinge graphic. Lift the freezer door free from the cabinet.

4.Remove the parts for the center hinge as shown in the Center Hinge graphic. Lift the refrigerator door free from the cabinet.

5.Remove the parts for the bottom hinge as shown in the Bottom Hinge graphic.

5

Image 5
Contents Table of Contents / Índice / Table des matières Before You Throw Away Your Old Refrigerator or Freezer Refrigerator SafetyClean Before Using Installation InstructionsUnpack the Refrigerator Location RequirementsConnect the Water Supply Electrical RequirementsWater Supply Requirements Refrigerator Doors Complete the InstallationConnect to Refrigerator Style Remove Doors and HingesStyle 1 Standard Reverse Doors optionalStyle 2 Contoured Replace Doors and HingesDoor Removal Replacement Door Swing Reversal optional Door Swing Reversal optional Using the Control Adjust the DoorsAdjusting Controls CONDITION/REASON AdjustmentRefrigerator Care CleaningIce Maker Changing the Light BulbRefrigerator Operation TroubleshootingIce and Water Temperature and MoistureItems Excluded from Warranty Limited WarrantyThis limited warranty does not cover Disclaimer of Implied Warranties Limitation of RemediesAyuda o Servicio Técnico Seguridad DEL RefrigeradorDesempaque el refrigerador Instrucciones DE InstalaciónQuite los materiales de empaque Limpie su refrigerador antes de usarloRequisitos eléctricos Requisitos de ubicaciónRequisitos del suministro de agua Método de conexión a tierra recomendadoConexión del suministro de agua Cómo terminar la instalación Puertas del refrigeradorCómo quitar las puertas y las bisagras Cambio del sentido de apertura de las puertas opcionalPasos finales Estilo 2 ContorneadaCómo volver a poner en su lugar las puertas y las bisagras Bisagra superior Cómo quitar y volver a poner la puerta en su lugar Ajuste las puertas USO DE SU RefrigeradorUso del control Cómo ajustar los controlesLimpieza Cuidado DE SU RefrigeradorFábrica de hielo Funcionamiento del refrigerador Solución DE ProblemasCómo cambiar el foco Hielo y agua Temperatura y humedadGarantía Limitada Whirlpool CorporationExclusiones DE LA Garantía Esta garantía limitada no cubreSécurité DU Réfrigérateur Guide D’UTILISATION ET D’ENTRETIEN DU RéfrigérateurDéballage du réfrigérateur Instructions DinstallationRetirer les matériaux d’emballage Nettoyage avant l’utilisationMéthode recommandée de mise à la terre Exigences d’emplacementSpécifications électriques Spécifications de l’alimentation en eauPression de leau Raccordement de la canalisation d’eauAlimentation en eau par osmose inverse Raccordement à une canalisation d’eauPortes du réfrigérateur Achever l’installationInversion des portes facultatif Démontage Portes et charnièresCaisse Porte du compartiment de congélationStyle 2 Contour Réinstallation Portes et charnièresÉtapes finales PortesInversion du sens douverture de la porte option Style 2 Contour Ajustement des commandes Utilisation de la commandeUtilisation DU Réfrigérateur Ajustement des portesNettoyage Entretien DU RéfrigérateurMachine à glaçons Fonctionnement du réfrigérateur Remplacement de l’ampoule d’éclairageDépannage Glaçons et eau Température et humiditéGarantie Limitée Garantie DES Gros Appareils Ménagers Whirlpool CorporationArticles Exclus DE LA Garantie La présente garantie limitée ne couvre pas

2316077B specifications

Estate 2316077B is a groundbreaking development that has transformed the landscape of modern living. This estate is designed not just as a place to reside but as a harmonious integration of sustainability, technology, and lifestyle amenities. One of its main features is the emphasis on eco-friendly architecture, which incorporates renewable resources, energy-efficient designs, and sustainable materials. The buildings are constructed with advanced insulation techniques that minimize energy loss, lowering utility costs for residents.

The estate boasts smart home technologies that redefine convenience and security. Every unit is equipped with a comprehensive home automation system that allows residents to control lighting, heating, and security features from their smartphones or tablets. This integration of technology not only enhances comfort but also promotes energy efficiency, as systems can be optimized for usage patterns. Additionally, advanced security measures, including biometric entry systems and 24/7 monitoring, provide residents with peace of mind.

Another notable characteristic of Estate 2316077B is its commitment to community and wellness. The estate includes lush green spaces, walking trails, and recreational areas that encourage outdoor activities and social interactions. There are dedicated zones for gardening, playgrounds for children, and facilities for fitness and relaxation. Together, these features foster a strong sense of community among residents, making the estate a desirable place to live.

The technological amenities extend beyond smart home features. Internet connectivity is robust, with high-speed fiber-optic networks available throughout the estate. This ensures that residents can easily work from home, stream entertainment, and engage in online learning without interruptions.

Moreover, Estate 2316077B is strategically located near essential services such as schools, shopping centers, and healthcare facilities. Its accessibility to public transportation further enhances its appeal, making commuting convenient for those who work in nearby urban centers.

In summary, Estate 2316077B represents a forward-thinking approach to modern living, blending innovative technologies, sustainable practices, and community-centric design. Its focus on providing a high-quality lifestyle while prioritizing environmental responsibility makes it a premier choice for discerning homeowners. As urban living continues to evolve, developments like Estate 2316077B set a new standard for what residents can expect from their living environments.