Estate 2316077B warranty Temperature and Moisture, Ice and Water

Page 12

The doors are difficult to open

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

■Gaskets dirty or sticky? Clean gaskets and contact surfaces with mild soap and warm water. Rinse and dry with soft cloth.

The lights do not work

■Is a light bulb loose in the socket or burned out? See “Changing the Light Bulbs.”

Temperature and Moisture

Temperature is too warm

■New installation? Allow 24 hours following installation for the refrigerator to cool completely.

■Door(s) opened often or left open? Allows warm air to enter refrigerator. Minimize door openings and keep doors fully closed.

■Large load of food added? Allow several hours for refrigerator to return to normal temperature.

■Controls set correctly for the surrounding conditions? Adjust the controls a setting colder. Check temperature in 24 hours. See “Using the Controls.”

There is interior moisture buildup

NOTE: Some moisture buildup is normal.

■Humid room? Contributes to moisture buildup.

■Door(s) opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep doors fully closed.

Ice and Water

The ice maker is not producing ice or not enough ice

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Ice maker turned on? Make sure wire shutoff arm or switch (depending on model) is in the ON position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.

■Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

■Water shutoff valve not fully open? Turn the water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

■Questions remain regarding water pressure? Call a licensed, qualified plumber.

Off-taste, odor or gray color in the ice

■New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.

■Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice.

■Odor transfer from food? Use airtight, moisture proof packaging to store food.

■Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Table of Contents / Índice / Table des matières Refrigerator Safety Before You Throw Away Your Old Refrigerator or FreezerInstallation Instructions Clean Before UsingUnpack the Refrigerator Location RequirementsElectrical Requirements Water Supply RequirementsConnect the Water Supply Complete the Installation Refrigerator DoorsConnect to Refrigerator Style Remove Doors and HingesReverse Doors optional Style 1 StandardStyle 2 Contoured Replace Doors and HingesDoor Removal Replacement Door Swing Reversal optional Door Swing Reversal optional Adjust the Doors Using the ControlAdjusting Controls CONDITION/REASON AdjustmentCleaning Refrigerator CareIce Maker Changing the Light BulbTroubleshooting Refrigerator OperationTemperature and Moisture Ice and WaterLimited Warranty Items Excluded from WarrantyThis limited warranty does not cover Disclaimer of Implied Warranties Limitation of RemediesSeguridad DEL Refrigerador Ayuda o Servicio TécnicoInstrucciones DE Instalación Desempaque el refrigeradorQuite los materiales de empaque Limpie su refrigerador antes de usarloRequisitos de ubicación Requisitos eléctricosRequisitos del suministro de agua Método de conexión a tierra recomendadoConexión del suministro de agua Puertas del refrigerador Cómo terminar la instalaciónCómo quitar las puertas y las bisagras Cambio del sentido de apertura de las puertas opcionalEstilo 2 Contorneada Cómo volver a poner en su lugar las puertas y las bisagrasPasos finales Bisagra superior Cómo quitar y volver a poner la puerta en su lugar USO DE SU Refrigerador Ajuste las puertasUso del control Cómo ajustar los controlesCuidado DE SU Refrigerador Fábrica de hieloLimpieza Solución DE Problemas Cómo cambiar el focoFuncionamiento del refrigerador Temperatura y humedad Hielo y aguaWhirlpool Corporation Garantía LimitadaExclusiones DE LA Garantía Esta garantía limitada no cubreGuide D’UTILISATION ET D’ENTRETIEN DU Réfrigérateur Sécurité DU RéfrigérateurInstructions Dinstallation Déballage du réfrigérateurRetirer les matériaux d’emballage Nettoyage avant l’utilisationExigences d’emplacement Méthode recommandée de mise à la terreSpécifications électriques Spécifications de l’alimentation en eauRaccordement de la canalisation d’eau Pression de leauAlimentation en eau par osmose inverse Raccordement à une canalisation d’eauAchever l’installation Portes du réfrigérateurDémontage Portes et charnières Inversion des portes facultatifCaisse Porte du compartiment de congélationRéinstallation Portes et charnières Style 2 ContourÉtapes finales PortesInversion du sens douverture de la porte option Style 2 Contour Utilisation de la commande Ajustement des commandesUtilisation DU Réfrigérateur Ajustement des portesEntretien DU Réfrigérateur Machine à glaçonsNettoyage Remplacement de l’ampoule d’éclairage DépannageFonctionnement du réfrigérateur Température et humidité Glaçons et eauGarantie DES Gros Appareils Ménagers Whirlpool Corporation Garantie LimitéeArticles Exclus DE LA Garantie La présente garantie limitée ne couvre pas

2316077B specifications

Estate 2316077B is a groundbreaking development that has transformed the landscape of modern living. This estate is designed not just as a place to reside but as a harmonious integration of sustainability, technology, and lifestyle amenities. One of its main features is the emphasis on eco-friendly architecture, which incorporates renewable resources, energy-efficient designs, and sustainable materials. The buildings are constructed with advanced insulation techniques that minimize energy loss, lowering utility costs for residents.

The estate boasts smart home technologies that redefine convenience and security. Every unit is equipped with a comprehensive home automation system that allows residents to control lighting, heating, and security features from their smartphones or tablets. This integration of technology not only enhances comfort but also promotes energy efficiency, as systems can be optimized for usage patterns. Additionally, advanced security measures, including biometric entry systems and 24/7 monitoring, provide residents with peace of mind.

Another notable characteristic of Estate 2316077B is its commitment to community and wellness. The estate includes lush green spaces, walking trails, and recreational areas that encourage outdoor activities and social interactions. There are dedicated zones for gardening, playgrounds for children, and facilities for fitness and relaxation. Together, these features foster a strong sense of community among residents, making the estate a desirable place to live.

The technological amenities extend beyond smart home features. Internet connectivity is robust, with high-speed fiber-optic networks available throughout the estate. This ensures that residents can easily work from home, stream entertainment, and engage in online learning without interruptions.

Moreover, Estate 2316077B is strategically located near essential services such as schools, shopping centers, and healthcare facilities. Its accessibility to public transportation further enhances its appeal, making commuting convenient for those who work in nearby urban centers.

In summary, Estate 2316077B represents a forward-thinking approach to modern living, blending innovative technologies, sustainable practices, and community-centric design. Its focus on providing a high-quality lifestyle while prioritizing environmental responsibility makes it a premier choice for discerning homeowners. As urban living continues to evolve, developments like Estate 2316077B set a new standard for what residents can expect from their living environments.
Top Page Image Contents