6. Maintenance
6.1 General
6.2 Replacing the lamp
Fig. 48
Fig. 49
The appliance must always be disconnected from the mains when being repaired.
If the appliance does not function correctly, check the fuses first.
If the power supply is functioning correctly, but your appliance still does not work, please contact your dealer or your local Gaggenau customer service agency. Specify the appliance type (see rating plate).
Repairs may only be carried out by authorised electricians, in order to guarantee the safety of the appliance.
Unauthorised tampering with the appliance will invalidate any warranty claims.
Replacing the lamp
You can obtain spare lamps (Order No. 157312) from Gaggenau Customer Service or a dealer. We recommend that you use these lamps only. Proceed as follows:
–Disconnect fuses
–Remove one of the lamp cover screws. Unscrew the grill heating element partly or completely if you have problems unscrewing the cover.
–Swivel the cover to the side.
Caution: in certain circumstances, the lamp cover may still be hot.
–Push the lamp to the side by about
–Insert the lamp in the reverse order. Swivel the cover back to its original position and screw it on. (Caution: Secure the seal properly!)
If you have removed the grill heating element, also screw it down again.
Note: do not touch the halogen lamp with your hands. Use a cloth and only touch the edges of the lamp.
32