Fagor America 6HA-200 TDX manual Electrical Connection, Connecting the Feeding Cable to the Mains

Page 11

2.3ELECTRICAL CONNECTION

WARNING! ELECTRICAL SHOCK HAZARD

Disconnect electrical power at the breaker box or fuse box before installing this appliance. Please make sure the unit is properly grounded for safety. Use copper conductors only. Failure to follow these indications could result in serious injury or death.

CAUTION

Label all wires prior to disconnecting when servicing controls. Wiring errors can cause improper and dangerous operation. Always verify proper operation after servicing.

The appliance is fitted with an approved 15 Amp flexible cord which must be connected to a correctly grounded power line. The manufacturer is not liable for any direct or indirect damage caused by faulty installation or connection. It is therefore necessary that all installation and connection operations are carried out by qualified personnel complying with the applicable local and general regulations.

The wire section on the cable must not be less than1.5mm (3×1.5cable). Use only the special cables available at our service centers.

CONNECTING THE FEEDING CABLE TO THE MAINS

Connect the feeding cable to a plug suitable for the load indicated on the rating plate of the product. In case of a direct connection to the mains (cable without plug), it is necessary to insert a suitable omnipolar switch before the appliance, with minimum opening between contacts of 3 mm (the grounding wire should not be interrupted by the switch).

Before connecting to the main electrical wiring, make sure:

•The electrical system of your home and socket are able to withstand the maximum load required to run the oven (see rating plate).

•The supply system is regularly grounded, according to the local regulation codes.

•The socket or the omnipolar switch can easily be reached after the installation of the oven.

•If the socket and appliance plug are not compatible, have the socket replaced with a suitable model by a qualified technician. The technician will also have to ensure that the cross section of the socket cables are adequate for the maximum load required by the oven.

•After carrying out the connection to the main electrical wiring, make sure the supplying cable does not come into contact with parts subject to heating. The cord should be positioned so that it does not reach a temperature of more than 125°F with respect to the room temperature anywhere along its length.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Installation Use Care Instructions Page Contents Thank YOU Electrical Safety Important SafeguardsSafety Instructions Safety During Operation Stainless Steel Oven Front Child SafetyCleaning Safety Oven ExteriorDisposing of Old Appliances AccessoriesDisposing of the Packaging Material Installation Dimensions Installation and Electrical ConnectionBefore Installation Page Electrical Connection Connecting the Feeding Cable to the MainsFinal Preparation Finishing Your InstallationGetting Started Using the Oven and Practical TipsBefore Using the Oven for the First Time Adjusting the ClockControl Panel Switching Test Mode OnSwitching Test Mode Off General DescriptionOven Light Cooking with Your OvenPage To change the time STOP/START Digital DisplayClock Cooking TimeTo set the auto-stop cooking time Auto-Stop CookingCooking Time and Auto Stop Cooking Combined How to use the memory function TimerTo set the Timer To turn beeping off Child Safety LockTo set the child safety lock To unlock the child safety lockSuggestions and Practical Tips for Baking Practical Advice and Cooking TableOperating the Oven Table of Cooking Times Traditional Baking Time & Temperature ChartsPre-cooked Food Oven Interior Oven Cleaning and MaintenanceCleaning Oven ExteriorHelpful Tips AccessoriesReplacing the Interior Light Bulb ENERGY-SAVING Tips Table DES Matières Message DE Bienvenue Sécurité électrique Instructions DE Sécurité ImportantesConsignes de sécurité Sécurité Pendant le Fonctionnement Mise EN GardeAvant du Four en Acier Inoxydable Sécurité des EnfantsSécurité du Nettoyage Extérieur du FourMise au rebut des appareils usés AccessoiresMise au Rebut du Matériel d’emballage Mesures Pour L’INSTALLATION Installation ET Connexion ElectriqueAvant L’INSTALLATION Page Connexion DU Cable D’ALIMENTATION AU Réseau Branchement ÉlectriqueAvertissement ! Risque DE Choc Électrique Derniers Préparatifs Finir L’INSTALLATIONMise en Route Utilisation DU Four ET Conseils PratiquesAvant D’UTILISER LE Four Pour LA Première Fois Réglage de l’heurePanneau DE Contrôle Activation du Mode de TestInactiver le Mode de Test Description GénéraleLA Lumière DU Four Cuisiner Avec Votre FourPage Pour régler la durée de cuisson Temps de CuissonPour changer l’heure Pour régler le temps de cuisson Auto-Stop Cuire Avec l’Auto-StopTemps de Cuisson et Auto-Stop Combinés Comment utiliser la fonction Mémoire MinuteriePour régler la minuterie Pour réactiver le son Verrouillage de Sécurité Pour EnfantsPour déverrouiller le verrou de sécurité pour enfants Pour couper le sonSuggestions et Conseils Pratiques Pour la Cuisson Fonctionnement DU FourConseils Pratiques ET Table DE Cuisson Aliments Tableau DES Temps DE CuissonAliments précuits 2. L’intérieur du Four Nettoyage ET Entretien DU FourNettoyage 1. L’extérieur du FourConseils Utiles Les AccessoiresComment Remplacer LA Lampe DU Four Conseils Pour Économiser DE L’ÉNERGIE Page Fagor AMERICA, INC

6HA-200 TDX, 6HA-200 TRX, 6HA-200 TLX specifications

Fagor America presents a trio of exceptional commercial dishwashers designed to meet the diverse needs of the foodservice industry: the 6HA-200 TLX, 6HA-200 TRX, and 6HA-200 TDX. Engineered for efficiency and performance, these models cater to various operations, ensuring cleanliness and sanitation while being considerate of utility costs.

The 6HA-200 TLX, a front-loading model, is perfect for environments where space is at a premium. Featuring a compact design, it seamlessly integrates into small kitchens without sacrificing washing capacities. Its powerful wash pumps deliver high-pressure jets that remove stubborn food residues, and the adjustable wash cycles allow operators to select the appropriate cycle based on the type and level of soiling, ensuring optimal water and energy usage.

The 6HA-200 TRX, a pass-through design, is specifically crafted for high-volume operations. This model maximizes efficiency by allowing for continuous loading and unloading. Its state-of-the-art technology includes a built-in eXpress rinse system, which reduces water usage while maintaining superior rinsing performance. Additionally, the TRX model is equipped with an advanced digital control panel that allows operators to monitor and adjust settings easily, enhancing operational flexibility.

On the other hand, the 6HA-200 TDX model is tailored for establishments that prioritize hygiene and sanitation. This version is designed with an innovative dual-filter system that captures and removes debris and particles from the wash cycle, ensuring cleaner dishes with every load. Moreover, the TDX features a chemical dispensing system that accurately doses detergents and rinse aids, optimizing the cleaning process while minimizing chemical waste.

All three models utilize smart technology to provide real-time diagnostics and alerts for maintenance needs, significantly reducing downtime. They are built with durable stainless steel construction, ensuring longevity and resistance to the rigors of commercial use. User-friendly interfaces simplify operation, making it easy for staff to navigate through various settings.

Ultimately, the Fagor America 6HA-200 series of dishwashers exemplifies a commitment to innovation, efficiency, and hygiene, making them essential appliances for any foodservice establishment. From small cafes to large banquet halls, these dishwashers promise to enhance productivity while delivering consistently clean results.
Top Page Image Contents