HP 22 Inch KQ437AA manual Connecting to the Internet, Turning off the HP TouchSmart PC

Turning off the HP TouchSmart PC

Tap the Windows Vista start button , tap the Arrow button next to the Lock icon, and then select Shut Down.

Changing power settings

You can choose basic power settings that can help conserve energy or enhance computer performance. You can also customize power settings for your computer hardware. For example, you can set your computer to go to sleep after a specified period of inactivity.

What used to be called Standby is now called Sleep in Microsoft Windows Vista. In Sleep mode, your work is saved to memory, and then the computer enters a power-saving state. In Hibernate mode, your work is saved to the hard disk drive, and then the computer enters a power-saving state.

To put the computer into Sleep mode, tap the Windows Vista start button , tap the Arrow button next to the Lock icon, and then select Sleep.

To change power settings:

1Tap the Windows Vista start button .

2Tap Control Panel, and make sure Classic View is selected.

3Tap Power Options.

4Select a power plan.

5Select Change plan settings.

6Use the drop-down arrows to select your power settings, and then tap Save Changes.

7You can also select Change advanced power settings, select your options, and then tap OK.

Connecting to the Internet

Your HP TouchSmart PC is designed to support a wireless or wired LAN that connects your computer to other devices, such as printers and other PCs. The network connection to the Internet is usually through a broadband modem (digital subscriber line [DSL] or cable), which requires a separate subscription.

￿For a wireless LAN, the HP TouchSmart PC includes a built-in wireless LAN antenna, which you can use to access your wireless home network.

￿For a wired LAN, connect an Ethernet cable (sold separately) to the Ethernet connector on the back of the computer, and then connect the other end to the network router or broadband modem.

Getting to Know the HP TouchSmart PC 13