HP 22 Inch KQ437AA, IQ504 KQ436AA-NOOS manual Getting to Know the HP TouchSmart PC

To connect the TV signal source to your HP TouchSmart PC:

1Connect the coaxial cable from your TV antenna or TV cable provider to the TV In (NTSC/ATSC) (A) connector located on the back of the computer behind the connector cover.

Or

Connect an S-Video cable to the S-Video In connector (B), located on the back of the computer behind the connector cover. Connect the other end of the cable to your set-top box.

A

B

C

D

2If you are using S-Video, connect audio cable from your set-top box to the Audio line in (C) connector on the back of the computer. Use with a Y cable to combine RCA left and right channels

(white and red).

3If you are using a set-top box, connect the IR emitter cable to the IR emitter connector (D) on the back of the computer, in order to use the remote control. The IR emitter cable is shown in the following illustration. You must adhere the IR blaster onto the set-top box IR receiver window. Point the remote control at the computer (not the set-top box).

Getting to Know the HP TouchSmart PC 19