HP Debranded 22 Inch TSMT506, IQ504 KQ436AA-NOOS, 22 Inch KQ437AA manual Installing a Security Lock

Installing a Security Lock

A security lock (sold separately) enables you to secure your computer from theft and unwanted changes. A security lock is a key lock device that has a wire cable attached. You attach one end of the cable to your desk (or other stationary object) and the other to this slot on the computer. Secure the security lock with the key.

When moving the computer or opening the memory cover, you must remove the security lock from the computer.

To install a security lock:

1Place the computer face-down on a soft flat surface (A). HP recommends that you set down a blanket, towel, or other soft cloth to protect the touch screen surface from scratches or other damage.

2Lift the computer stand as far as it will go to an upright position, about 90 degrees (B) from the computer, and then move the lock latch on the stand to the left until it is in the locked position (C). You need to apply additional pressure to place the stand in this position.

B

C

A

3Insert the security lock into the lock slot by following the lock manufacturer’s instructions.

4Move the stand slightly beyond 90 degrees and hold it with one hand while the other hand moves the lock latch on the stand to the right until it is in the unlocked position. You need to apply additional pressure to release the lock latch.

26Getting Started