DCS BGB48-BQAR, BGB48-BQR manual Safety Practices & Precautions

Page 7

SAFETY PRACTICES & PRECAUTIONS

When using the side burners always use flat bottomed pans which are large enough to cover the side burner. Adjust the flame so that it heats only the bottom of the pan to avoid ignition of clothing. Position handles inward away from open edges of the unit to avoid burns associated with unintentional spillovers. Hold the handle of the pan to prevent movement of it when turning or stirring food. For proper lighting and performance of the burners keep the ports clean. It is necessary to clean periodically for optimum performance.

Clean the grill with caution. Avoid steam burns; do not use a wet sponge or cloth to clean the grill while it is hot. Some cleaners produce noxious fumes or can ignite if applied to a hot surface.

Be sure all grill controls are turned off and the grill is cool before using any type of aerosol cleaner on or around the grill. The chemical that produces the spraying action could, in the presence of heat, ignite or cause metal parts to corrode.

Do not use the grill for cooking excessively fatty meats or products which promote flare-ups.

Never grill without the drip pan and grease tray in place and pushed all the way to the back of the grill. Without it hot grease could leak downward and produce a fire or explosion hazard.

Do not operate the grill under unprotected combustible construction. Use only in well ventilated areas. Do not use in buildings, garages, sheds, breezeway, covered structure or other such enclosed areas. This unit is for outdoor use only.

If a cart unit is stored indoors, ensure that it is cool, fold the side shelf down, then push, never pull, the grill and never push or pull on the side shelves. If LP, the cylinder must be unhooked and the LP cylinder stored outside in a well ventilated area, out of reach of children.

Never use the grill in a windy area.

Do not use charcoal or lighter fluid in the outdoor grill.

Keep any electrical supply cord, or the rotisserie motor cord away from the heated areas of the grill and water (pools, fountains, puddles).

Never use a dented or rusty LP tank. Keep the ventilation openings of the cylinder enclosure free and clear from debris.

Use only dry potholders; moist or damp potholders on hot surfaces may cause burns from steam. Do not use a towel or bulky cloth in place of potholders. Do not let potholders touch hot portions of the grill or burner grate.

Have an ABC rated Fire Extinguisher accessible – never attempt to extinguish a grease fire with water or other liquids.

To avoid burns when cooking, use long handled BBQ tools.

Do not move the appliance during its use.

This unit is for outdoor use only! Do not operate in enclosed areas. This could result in carbon monoxide build- up which would result in injury or death.

When using a grill, be sure that all parts of the unit are firmly in place and that the grill is stable (can’t be tipped over).

To put out flare-ups, adjust the controls to lower the temperature

CALIFORNIA PROPOSITION 65-WARNING:The Burning of gas cooking fuel generates some by-products which are on the list of substances which are known by the State of California to cause cancer or reproductive harm. California law requires businesses to warn customers of potential exposure to such substances. To minimize exposure to these substances, always operate this unit according to the Use and Care Guide, ensuring you provide good ventilation when cooking with gas.

This outdoor cooking gas appliance is not intended to be installed in or on recreational vehicles, trailers and/or boats.

Note:

This product must be installed by a licensed plumber or gas fitter when installed within the Commonwealth of Massachusetts.

5

Image 7
Contents Professional 36/48 BGB Grill Page Please Retain this Manual for Future Reference Message to OUR CustomersTable of Contents Important Safety Notice Safety Practices & PrecautionsPreferred AIR Flow Grill PlacementSafety Practices & Precautions Grill Models Locating GRILL/BUILT-IN Clearances InstallationLocation Clearances to Non-Combustible Construction Clearances to Non-Combustible ConstructionGeneral Clearances to Combustible ConstructionInsulated Jacket BUILT-IN Construction Details Access Drawers Cutout dimensions GAS HOOK-UP LP Gas LP Tank Requirements18 max LP Tank Restraint for BUILT-IN InstallationStep Before Testing Leak TestingTo Test Grill Burner Flame Height Burner AdjustmentGrill Burner AIR Adjustment LOW Flame Setting AdjustmentRadiant Asssembly Installation Radiant AssemblyThese Instructions Installer ChecklistLighting Instructions Using the GrillTo Light the Grill Burner Burner Off GrillingDIRECT/INDIRECT Cooking Notes BurnerDUAL-SIDED Grates Grilling HintsShaped Grate Radius Grate To Light the Smoker Burner Using the Smoker SystemWood Chips ROD Light Using the RotisserieMeat Preparation PreparationRecommended Working AreaManual Lighting To Light the Rotisserie Burner Before CookingCooking on Rotisserie Care and Maintenance Stainless Steel To Remove the U-BURNERS for CleaningGrill Burner Cleaning Orifice CleaningSmoker Burner Side Burners BGB48 BQR ModelLOW Heat with Knob in HI/SEAR Position TroubleshootingBefore Calling for Service Grill WON’T Light When the Ignition Button is PushedHOW to Obtain Service ServiceThis Warranty does not Cover WarrantyLimited Warranty HOW Long does this Limited Warranty LAST?Commercial USE HOW to GET ServiceNo Other Warranties LE Gril DE Série Professionnelle BGB 36/48 PO Veuillez Conserver CE Manuel À Titre DE Référence Lintention DE NOS ClientsTable DES Matières Autocollant Mesures DE Sécurité ET DE PrécautionDe ventilation Flux Dévent DE Sortie Emplacement DU GrilRemarque Modèles DE Gril Emplacement Emplacement DU Gril ET DES DégagementsEspaces de dégagement pour une construction non combustible Enveloppe Isolée GénéralitésDisposition standard pour une enceinte non combustible Détails Dune Construction Intégrée+0,-1/8 +1/8,-0 Pour Connecter LES Raccords Fournis Avec LE Gril Branchement DU GAZExigences Concernant LE GAZ Branchement DU GAZ NaturelExigences Concernant LA Bouteille DE Propane Mise EN GardeRemarque Placez le dispositif de retenue de bouteille dans lîlot Fig Avant la vérification Test DE Détection DES FuitesPour tester Réglages Pour Niveau BAS Réglages DES BrûleursRéglage Dair DU Brûleur DU Gril Hauteur DES Flammes DU Brûleur DU GrilInstallation DE Lensemble DU Radiant Installation DE Lensemble DU RadiantListe DE Contrôle DE Linstallateur Allumage du gril à lallumette Utilisation DU GrilInstructions Dallumage Pour Allumer LE Brûleur DU GrilGril Instructions DALLUMAGE/CUISSON SUR GrilAllumage des brûleurs latéraux avec une allumette Brûleurs latérauxConseils AU Sujet DU Gril Cuisson SUR GrilGrille EN Forme DE « W » Grille Arondie Grilles Double FacePour Allumer LE Brûleur À Fumoir Utilisation DU Système À FumoirCopeaux DE Bois Utilisation DE LA Rôtissoire Préparation RecommandéAllumage Manuel Pour Allumer LE Brûleur DE Rôtisserie Avant DE Faire CuireCuisson SUR LA Rôtissoire Entretien ET Nettoyage Déposer DES Brûleurs EN U Pour LE Nettoyage Acier InoxydableÉlectrodes Brûleur DU GrilBrûleur À Fumoir Brûleurs Latéraux BGB48 BQR ModeleChaleur Faible Avec LE Bouton EN Position « SEAR/HI » Avant Dappeler LE Service TechniqueDépannage LE Gril NE Sallume PAS Lorsquon Enfonce LE Bouton DallumagePour Lobtention DU Service DE Garantie Quelle EST LA Durée DE Cette Garantie LIMITÉE? GarantieGarantie Limitée Fisher & Paykel Sengage ÀUtilisation Commerciale Pour Obtenir DES RéparationsAucune Autre Garantie Remarque Page Litho in USA 09/2001

BGB48-BQAR, BGB48-BQR specifications

The DCS BGB48-BQR and BGB48-BQAR are cutting-edge battery systems designed for a range of applications, primarily focusing on delivering reliable energy storage solutions. These models are part of a contemporary line of products that exemplify advanced technologies in battery management and energy efficiency.

One of the key features of the BGB48-BQR and BGB48-BQAR is their high energy density, which maximizes the usable energy within a compact form factor. This is particularly beneficial for applications that require a substantial amount of energy but have limited space for battery installation. The sleek design not only enhances the aesthetics of installations but also allows for flexible integration into existing systems.

The technology utilized in these batteries includes lithium-ion cells, which are renowned for their longevity and performance. With a cycle life that often surpasses 3,000 cycles, users can expect these batteries to maintain their capacity over extended periods, reducing the need for frequent replacements. This durability translates into lower operational costs and less environmental impact.

Another standout characteristic is the sophisticated Battery Management System (BMS) integrated into both models. The BMS continuously monitors the health of each battery cell, ensuring optimal performance and safety. It balances charging and discharging processes, mitigates risks of overcharging or overheating, and extends the overall lifespan of the battery. Additionally, the BMS provides real-time data to users, facilitating informed decision-making regarding energy consumption and battery usage.

Safety is a paramount consideration in the design of the DCS BGB48-BQR and BGB48-BQAR systems. These batteries incorporate multiple layers of protection, including thermal management that prevents overheating, as well as protective circuits that safeguard against short circuits and electrical surges.

Furthermore, both models support various communication protocols, enabling seamless integration with smart energy systems. This feature allows them to interact with solar panels, inverters, and grid systems, making them suitable for renewable energy applications and storage.

In summary, the DCS BGB48-BQR and BGB48-BQAR represent the forefront of battery technology with their high energy density, advanced BMS, robust safety features, and adaptability for a diverse range of applications. These characteristics make them an ideal choice for businesses and individuals seeking efficient, reliable, and sustainable energy storage solutions.