Aiwa XR-MD95 manual MD Guide Messages, Message Cause, Solution

MD GUIDE MESSAGES

Message		Cause
Blank	Disc	Nothing	is recorded	on	the disc.
Can’t	Edit	Tracks	are too short	to	be joined up.

The combine function was used while playing back the first track.

The divide function is used at the beginning of the track.

Solution

—

See “THELIMITATIONS OF MINI DISC” on page 13.

Disabled.

The combine function was used to join a track recorded in monaural with a track recorded in stereo.

Disc

Error

The

disc

is damaged

by scratches.

Replace

the

disc.

The

unit

received

a strong

shock

during

a TOC

Do not subject

the disc to strong

shocks

during a

reading.

TOC

reading.

Disc

Full

There

is not enough

time

to

record

on the disc.

Ret31ace the

disc

with

another

recordable

disc.

Temp

Over

The

temperature

of the unit is too high.

Leave

the unit

in a cool place

for

a while

before

operating

it again.

The

surrounding

temperature

is too

high

or too

Operate

the

unit

at moderate

room temperature.

low,

Caution!

The

unit

operates

abnormally

due

to

a scratched

Replace

the

disc.

Do

not subject

the unit

to a

disc

or

a strong

shock.

strong

shock.

PB DISC

A prerecorded

disc

is attempted

to

edit.

Replace

the

disc

with

a recordable

one.

Protected

The disc is record-protected,

Slide

the

record-protect

tab on the disc,

(See page

16.)

TOC

Full

There

are too

many

tracks

or emphasis

data to be

Erase

tracks.

recorded or edited, or there is no room on the

disc.

Mecha Err	Error occurs in the loading mechanism.
	(All functions will be disabled.)

Turn the power off and disconnect the AC cord once. Then turn it on again.

If this message still appears, consult your local Aiwa dealer.

Emergency		Recording		is no	longer	possible		because	there are
		scratches on the disc or the unit was subjected to
		a strong		shock during		recording.
Can’t	Copy	Recording		is not	possible		due	to SCMS	(see page
		13).
MD Error		An	error	occurred	in the MD unit of this				unit.
UTOC	Error	An	error	occurred	in the		TOC of the MD		because
		the unit was subjected to a strong shock during

recording, or during recording or reading of the TOC.

Exchange the MD,

Do not subject the unit to strong shocks.

Contact an Aiwa service representative.

Exchange the MD,

Do not subject the unit to strong shocks during recording, or during recording or reading of the TOC.

30 ENGLISH