Whirlpool W10551728A Water Supply Requirements, Connect the Water Supply, Tools Needed

Page 5

Water Supply Requirements

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

TOOLS NEEDED:

■

Flat-blade screwdriver

■

¹⁄₄" Nut driver

■

⁷⁄₁₆" and ¹⁄₂" Open-end or two

■

¹⁄₄" Drill bit

 

adjustable wrenches

■

Cordless drill

 

 

NOTE: Your refrigerator dealer has a kit available with a ¹⁄₄"

(6.35 mm) saddle-type shutoff valve, a union, and copper tubing. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes. Do not use a piercing-type or ³⁄₁₆"

(4.76 mm) saddle valve which reduces water flow and clogs more easily.

IMPORTANT:

■All installations must meet local plumbing code requirements.

■Use copper tubing and check for leaks. Install copper tubing only in areas where the household temperatures will remain above freezing.

Water Pressure

A cold water supply with water pressure of between 30 and 120 psi (207 and 827 kPa) is required to operate the water dispenser and ice maker. If you have questions about your water pressure, call a licensed, qualified plumber.

■If your refrigerator has a water dispenser: After installation is complete, use the water dispenser to check the water pressure.

■With the water filter removed, dispense 1 cup (237 mL) of water. If 1 cup of water is dispensed in 8 seconds or less, the water pressure to the refrigerator meets the minimum requirement.

■If it takes longer than 8 seconds to dispense 1 cup of water, the water pressure to the refrigerator is lower than recommended. See “Problem Solver” for suggestions.

Reverse Osmosis Water Supply

IMPORTANT: The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi (207 and

827 kPa).

If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa).

If the water pressure to the reverse osmosis system is less than

40 to 60 psi (276 to 414 kPa):

■Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.

■Allow the storage tank on the reverse osmosis system to refill after heavy usage.

■If your refrigerator has a water filter, it may further reduce the water pressure when used in conjunction with a reverse osmosis system. Remove the water filter. See “Water Filtration System” in the User Instructions, User Guide, or Use & Care Guide.

If you have questions about your water pressure, call a licensed, qualified plumber.

Connect the Water Supply

Read all directions before you begin.

IMPORTANT: If you turn the refrigerator on before the water line is connected, turn the ice maker OFF.

Connect to Water Line

1.Unplug refrigerator or disconnect power.

2.Turn OFF main water supply. Turn ON nearest faucet long enough to clear line of water.

3.Locate a ½" to 1¹⁄₄" (1.25 cm to 3.18 cm) vertical cold water pipe near the refrigerator.

IMPORTANT:

■Make sure it is a cold water pipe.

■Horizontal pipe will work, but drill on the top side of the pipe, not the bottom. This will help keep water away from the drill and normal sediment from collecting in the valve.

4.Determine the length of copper tubing you need. Measure from the connection on the lower left rear of refrigerator to the water pipe. Add 7 ft (2.1 m) to allow for cleaning. Use ¹⁄₄"

(6.35 mm) O.D. (outside diameter) copper tubing. Be sure both ends of copper tubing are cut square.

5.Using a cordless drill, drill a ¹⁄₄" hole in the cold water pipe you have selected.

 

A

G

B

 

 

C

F E

D

A. Cold water pipe

E. Compression sleeve

B. Pipe clamp

F. Shutoff valve

C. Copper tubing

G. Packing nut

D. Compression nut

 

6.Fasten the shutoff valve to the cold water pipe with the pipe clamp. Be sure the outlet end is solidly in the ¹⁄₄" (6.35 mm) drilled hole in the water pipe and that the washer is under the pipe clamp. Tighten the packing nut. Tighten the pipe clamp screws slowly and evenly so washer makes a watertight seal. Do not overtighten or you may crush the copper tubing.

7.Slip the compression sleeve and compression nut onto the copper tubing as shown. Insert the end of the tubing into the outlet end squarely as far as it will go. Screw compression nut onto outlet end with adjustable wrench. Do not overtighten.

8.Place the free end of the tubing in a container or sink, and turn ON the main water supply. Flush the tubing until water is clear. Turn OFF the shutoff valve on the water pipe. Coil the copper tubing.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Refrigerator User Instructions Your safety and the safety of others are very important Refrigerator SafetyUnpack the Refrigerator Installation InstructionsBefore You Throw Away Your Old Refrigerator or Freezer Remove the PackagingRecommended Grounding Method Location RequirementsElectrical Requirements Connect the Water Supply Water Supply RequirementsReverse Osmosis Water Supply Tools NeededConnect to Refrigerator StyleRemove the Doors and Hinges Refrigerator DoorsReplace the Doors and Hinges Style 2 Exterior Dispenser ModelsStyle 1 Interior Dispenser Models Plug in refrigerator or reconnect powerFinal Steps All Models Replace the base grille. See Base Grille graphicWiring Connection Install Air Filter Adjust the DoorsStyle 1 Install Manual Air Filter Status Indicator On some modelsRefrigerator USE Using the ControlsWater Filter Status Light and Reset Additional Features Door Open AlarmAir Filter Status Light and Reset Condition Temperature AdjustmentWater Dispenser Ice MakerDispenser Light Water Filtration SystemDispenser Lock Interior Dispenser ModelsRefrigerator Shelves Refrigerator FeaturesMeat Drawer CrisperWire Freezer Shelf Freezer FeaturesGlass Freezer Shelf Style 1 Plastic CoverDoor Rails Door FeaturesDoor Bins Utility Compartment and Can CaddyTo Clean Your Refrigerator CleaningRefrigerator Care Changing the Light BulbsRefrigerator Operation TroubleshootingMotor seems to run too much Refrigerator seems noisyTemperature is too warm Temperature and MoistureIce and Water Humid room? Contributes to moisture buildupWater Filter Certifications AccessoriesWater Filter Air FilterWater Filtration System Performance Data SheetLimited Warranty Whirlpool Corporation Major Appliance WarrantyItems Excluded from Warranty This limited warranty does not coverSeguridad DEL Refrigerador Desempaque el refrigerador Instrucciones DE InstalaciónAntes de tirar su viejo refrigerador o congelador Limpie su refrigerador antes de usarloRequisitos eléctricos Requisitos de ubicaciónRequisitos del suministro de agua Método de conexión a tierra recomendadoEstilo Conexión del suministro de aguaSuministro de agua de ósmosis inversa Cómo quitar las puertas y las bisagras Puertas del refrigeradorAbra la válvula de cierre Cómo terminar la instalaciónPasos finales todos los modelos Cómo volver a colocar las puertas y las bisagrasEstilo 2 Modelos con despachador exterior Estilo 1 Modelos con despachador interior Cómo quitar y volver a poner la puerta en su lugarConexión del cableado Notas Ajuste las puertasInstalación del filtro de aire Uso de los controles USO DE SU RefrigeradorCómo ajustar los controles Encendido/Apagado del enfriamientoFast Cool Enfriamiento rápido Características adicionales Alarma de puerta abiertaModelos con despachador exterior Condición Regulación DE LA TemperaturaLuz de estado del filtro de agua y reposición del filtro Fábrica de hieloDespachador de agua La luz del despachador Sistema de filtración de aguaEl bloqueo del despachador Modelos con despachador interiorCómo cambiar el filtro de agua Características DEL RefrigeradorEstantes del refrigerador Cajón para verduras Cajón para carnesEstilo 1 Cubierta de plástico Estilo 2 Cubierta de vidrioEstante de alambre del congelador Características DEL CongeladorEstante de vidrio del congelador Rieles de la puerta Características DE LA PuertaCompartimiento de uso general Portalatas Recipientes de la puertaLimpieza Cuidado DE SU RefrigeradorCómo cambiar los focos Para limpiar su refrigeradorFuncionamiento del refrigerador Solución DE ProblemasHielo y agua Temperatura y humedadEs difícil abrir las puertas Nota Es normal que se acumule un poco de humedad¿Está la presión de agua a por lo menos 35 lbs/pulg² AccesoriosFiltro de aire Filtro de etilenoSistema de filtración de agua Hoja DE Datos DEL RendimientoExclusiones DE LA Garantía Garantía LimitadaEsta garantía limitada no cubre Exclusión DE Garantías ImplícitasWhirlpool Brand Home Appliances Sécurité DU Réfrigérateur Instructions Dutilisation DU RéfrigérateurDéballage du réfrigérateur Instructions DinstallationAvant de jeter votre vieux réfrigérateur ou congélateur Nettoyage avant l’utilisationMéthode recommandée de mise à la terre Exigences demplacementSpécifications électriques Spécifications de l’alimentation en eauAlimentation en eau par osmose inverse Raccordement de la canalisation deauPression de leau Raccordement à la canalisation d’eauPortes du réfrigérateur Achever l’installationDémontage des portes et charnières Style 1 Modèles avec distributeur intérieurÉtapes finales tous les modèles Réinstallation des portes et charnièresStyle 2 Modèles avec distributeur extérieur Style 1 Modèles avec distributeur intérieur Dépose et réinstallation de la porteRaccordement des Remarques Installation du filtre à airAjustement des portes Ajustement des commandes Utilisation des commandesUtilisation DU Réfrigérateur Refroidissement Marche/ArrêtMise en marche/arrêt du refroidissement Caractéristiques supplémentaires Alarme de porte ouverteFast Cool refroidissement rapide Modèles avec distributeur extérieurDistributeur deau Machine à glaçonsTémoin lumineux et réinitialisation du filtre à eau Témoin lumineux et réinitialisation du filtre à airLumière du distributeur Système de filtration deauDispositif de verrouillage du distributeur Modèles avec distributeur intérieurTablettes du réfrigérateur Remplacement du filtre à eauCaractéristiques DU Réfrigérateur Bac à légumes Tiroir à viandeStyle 1 Couvercle en plastique Style 2 Couvercle en verreCaractéristiques DE LA Porte Caractéristiques DU CongélateurTablette métallique du congélateur Tablette en verre du congélateurNettoyage Entretien DU RéfrigérateurBalconnets de porte Éclairage du compartiment de réfrigération Remplacement des ampoules ’éclairageNettoyage de votre réfrigérateur Fonctionnement du réfrigérateur DépannageLe réfrigérateur ne fonctionne pas Le moteur semble trop tournerGlaçons et eau Température et humiditéRemarque Une certaine accumulation dhumidité est normale Remarque Cela indique une faible pression de leauAccessoires Système de filtration d’eau Feuille DE Données SUR LA PerformanceGarantie Limitée Garantie DE Gros Appareil Ménager Whirlpool CorporationÉléments Exclus DE LA Garantie La présente garantie limitée ne couvre pasPage W10551728A EN/FR PN W10551699A

W10551728A specifications

The Whirlpool W10551728A is a versatile and powerful appliance designed to meet the demands of modern households. This refrigerator model stands out due to its exceptional blend of innovation, efficiency, and style, offering consumers a dependable solution for food storage.

One of the main features of the W10551728A is its spacious interior, which offers ample storage options to accommodate a variety of food items. The refrigerator is designed with adjustable shelving, allowing users to customize the layout to suit their storage needs. This flexibility ensures that both large and small items can be easily organized and accessed.

In terms of technologies, the Whirlpool W10551728A incorporates adaptive cooling features that help maintain optimal temperatures, ensuring longer freshness for perishable goods. The refrigerator includes a temperature management system that automatically adjusts the internal climate based on the contents it holds. This not only enhances food preservation but also improves energy efficiency.

The Energy Star certification of the W10551728A underscores its eco-friendly design, making it a great choice for environmentally conscious consumers. The appliance is engineered to minimize energy consumption without compromising performance, thus saving on utility bills while contributing to a reduction in carbon footprint.

Another notable characteristic of the Whirlpool W10551728A is its user-friendly interface, which includes intuitive controls for adjusting temperature settings and activating special features. The sleek design is complemented by an exterior that is both stylish and easy to clean, helping the appliance blend seamlessly into any kitchen décor.

Additionally, the refrigerator features humidity-controlled crisper drawers designed to keep fruits and vegetables fresher for longer. By regulating humidity, these drawers prevent moisture loss, extending the shelf life of produce.

The Whirlpool W10551728A also boasts a reliable warranty, providing consumers peace of mind regarding the durability and longevity of their investment. With its combination of functionality, efficiency, and modern aesthetics, the W10551728A stands as an excellent choice for families seeking a robust and dependable refrigerator. Whether for storing groceries, preparing meals, or entertaining guests, this appliance ensures that your kitchen remains organized and efficient.
Top Page Image Contents