Whirlpool W10208432A, W10208431A Refrigerator Care, Cleaning, Changing the Light Bulb

Page 14

REFRIGERATOR CARE

Cleaning

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

Both the refrigerator and freezer sections defrost automatically. However, clean both sections about once a month to avoid buildup of odors. Wipe up spills immediately.

IMPORTANT:

Because air circulates between both sections, any odors formed in one section will transfer to the other. You must thoroughly clean both sections to eliminate odors. To avoid odor transfer and drying out of food, wrap or cover foods tightly.

For stainless steel models, stainless steel is corrosion- resistant and not corrosion-proof. To help avoid corrosion of your stainless steel, keep your surfaces clean by using the following cleaning instructions.

To Clean Your Refrigerator:

NOTE: Do not use abrasive or harsh cleaners such as window sprays, scouring cleansers, flammable fluids, muriatic acid, cleaning waxes, concentrated detergents, bleaches or cleansers containing petroleum products on exterior surfaces (doors and cabinet), plastic parts, interior and door liners or gaskets. Do not use paper towels, scouring pads, or other harsh cleaning tools.

1.Unplug refrigerator or disconnect power.

2.Hand wash, rinse, and dry removable parts and interior surfaces thoroughly. Use a clean sponge or soft cloth and a mild detergent in warm water.

3.Clean the exterior surfaces.

Painted metal: Wash painted metal exteriors with a clean, soft cloth or sponge and a mild detergent in warm water. Rinse surfaces with clean, warm water and dry immediately to avoid water spots.

Stainless steel: Wash stainless steel surfaces with a clean, soft cloth or sponge and a mild detergent in warm water. Rinse surfaces with clean, warm water and dry immediately to avoid water spots.

NOTE: When cleaning stainless steel, always wipe with the grain to avoid cross-grain scratching.

4.There is no need for routine condenser cleaning in normal home operating environments. If the environment is particularly greasy or dusty, or there is significant pet traffic in the home, the condenser should be cleaned every 2 to

3 months to ensure maximum efficiency. If you need to clean the condenser:

Remove the base grille.

Use a vacuum cleaner with a soft brush to clean the grille, the open areas behind the grille and the front surface area of the condenser.

Replace the base grille when finished.

5.Plug in refrigerator or reconnect power.

Changing the Light Bulb

NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to replace the bulb with an appliance bulb of the same size, shape, and wattage (no greater than 40 watts).

1.Unplug the refrigerator or disconnect power.

2.Remove the light shield, if necessary.

Freezer drawer models

Top of the refrigerator compartment - Slide the light shield toward the back of the compartment to release it from the light assembly.

Top of freezer compartment - The light shield opens from the back. Firmly press forward on the notches in the back of the shield and pull the shield down.

NOTE: You may need to remove the upper freezer shelf or basket to access the light assembly.

Freezer door models

Top of the refrigerator compartment - Slide the shield toward the back to release it from the light assembly.

Top of freezer compartment - Squeeze and pull rear of light shield toward you to release the tabs, then pull down.

3.Replace the burned-out bulb(s) with an appliance bulb(s) no greater than 40 watts.

4.Replace the light shield.

Freezer drawer models

Top of the refrigerator compartment - Insert the tabs on the shield into the liner holes on each side of light assembly. Slide the shield toward the front until it locks into place.

NOTE: To avoid damaging the light shield, do not force the shield beyond the locking point.

Top of the freezer compartment - Insert the front tabs of the shield into the liner and snap the back portion of the shield over the light assembly.

Freezer door models

Top of the refrigerator compartment - Insert the tabs on the shield into the liner holes on each side of the light assembly. Slide the shield toward the front until it locks.

NOTE: To avoid damaging the light shield, do not force the shield beyond the locking point.

Top of freezer compartment - Insert front tabs of light shield into liner and snap the back of the shield over light assembly.

5.Plug in refrigerator or reconnect power.

14

Image 14
Contents Refrigerator Safety Refrigerator User InstructionsUnpack the Refrigerator Installation InstructionsRemove the Packaging Clean Before Using Before You Throw Away Your Old Refrigerator or FreezerRecommended Grounding Method LocationRequirementsElectrical Requirements Reverse Osmosis Water Supply Water Supply RequirementsConnect the Water Supply StyleRefrigerator Doorsand Drawer Style 1-Standard Door Style 2-French DoorsRemove Drawer Front Replace Drawer FrontDoor Swing Reversal optional Standard Door Freezer DoorDrawer Front Removal Drawer Front Replacement Standard Door Freezer DrawerDoor Removal & Replacement Style 2-Freezer Drawer Models Adjust the DoorStyle1-Freezer Door Models Opening and Closing Doors Using the ControlsRefrigerator USE Crisper Humidity ControlWater Filtration System Ice MakerWater Dispenser Dispensing WaterRefrigerator Care CleaningTo Clean Your Refrigerator Changing the Light BulbRefrigerator Operation TroubleshootingTemperature and Moisture Ice and Water Water Filter Certifications Product Data Sheets Application Guidelines/Water Supply ParametersThis limited warranty does not cover Limited WarrantyItems Excluded from Warranty Disclaimer of Implied WarrantiesSeguridad DEL Refrigerador EL Usuario DEL RefrigeradorRequisitos de ubicación Instrucciones DE InstalaciónDesempaque el refrigerador Antes de tirar su viejo refrigerador o congeladorMétodo de conexión a tierra recomendado Requisitos eléctricosRequisitos del suministro de agua Suministro de agua por ósmosis inversaConexión a la línea de agua Conecte elsuministro de aguaEstilo Conexión al refrigeradorEstilo 2-Dos puertas con congelador en la parte inferior Puertas y cajóndel refrigeradorEstilo 1-Puerta estándar Modelos con puerta en el congelador Cómo quitar las puertas y las bisagrasModelos con congelador de cajón CarcasaCómo volver a poner las puertas y las bisagras en su lugar Para quitar el frente del cajónPara volver a colocar el frente del cajón Cómo quitar y volver a colocar el cajón del congeladorBisagra superior Puerta estándar-Congelador con puertaBisagra inferior Puerta estándar-Congelador de cajónBisagras superiores Dos puertas con congelador en la parte inferiorEstilo 2-Modelos con congelador de cajón Ajuste la puertaEstilo 1-Modelos de congelador con puerta Uso de los controles USO DE SU RefrigeradorCómo abrir y cerrar las puertas Para encender/apagarSistema de filtración de agua Fábrica de hieloDespachador de agua Cómo despachar aguaCómo cambiar el foco Cuidado DE SU RefrigeradorLimpieza Para limpiar su refrigeradorSolución DE Problemas Funcionamiento delrefrigeradorTemperatura y humedad Hielo y agua¿Está la presión de agua a por lo menos 35 lbs/pulg² Hoja DE Datos DEL Producto Pautas de aplicación/Parámetros para el suministro de aguaExclusiones DE LA Garantía Whirlpool CorporationGarantía Limitada Esta garantía limitada no cubreSécurité DU Réfrigérateur RéfrigérateurDéballagedu réfrigérateur Instructions D’INSTALLATIONExigences demplacement Avant de jeter votre vieux réfrigérateur ou congélateurSpécifications del’alimentationen eau Méthode recommandée de mise à la terreSpécificationsélectriques Alimentation en eau par osmose inverseRaccordement au réfrigérateur Raccordement de la canalisation deauRaccordement à une canalisation d’eau Style 2-Porte à deux battants Porteset tiroir du réfrigérateurStyle 1-Porte standard Style-1 Porte standard Déposer la façade du tiroir Réinstaller la façade du tiroirStyle 2-Portes à deux battants Inversion du sens douverture des portes option Porte standard Porte du compartiment de congélationVis de charnière Charnières supérieures Portes à deux battantsStyle 2-Modèles avec tiroir de congélation Ajustement de la porteStyle 1-Modèles de compartiments de congélation avec porte Utilisation DU Réfrigérateur Utilisation des commandesHumidity Control Commande dhumidité sur certains modèles Ouvertureet fermeture des portesDistribution d’eau Machine à glaçonsDistributeur d’eau CONDITION/RAISON AjustementSystème de filtration de leau Remplacement del’ampoule d’éclairageEntretien DU Réfrigérateur NettoyageLe réfrigérateur ne fonctionne pas DépannageFonctionnement du réfrigérateur Le moteur semble trop tournerLe réfrigérateur semble bruyant Température et humiditéGlaçons et eau Heures pour la fabrication de nouveaux glaçons Feuilles DE Données SUR LE Produit Système de filtration d’eau intérieurArticles Exclus DE LA Garantie Garantie DES Gros Appareils Ménagers Whirlpool CorporationGarantie Limitée La présente garantie limitée ne couvre pasW10208432A EN/FR PN W10208431A Whirlpool Corporation All rights reservedW10297791