Whirlpool W10208431A, W10208432A Remove Drawer Front, Replace Drawer Front

Page 7

Cabinet

1.Remove hinge screws from handle side and move them to opposite side. See Graphic 1-1.

2.Remove cabinet hinge hole plugs from cabinet top and move them to opposite side hinge holes as shown in Graphic 1-2.

Refrigerator door

1.Remove the refrigerator handle assembly as shown in Graphic 2. Keep all parts together.

2.Remove door handle seal screw front. Move to opposite side of refrigerator door as shown in Graphic 5.

3.Remove the door stop. Move it to the opposite side of the refrigerator door as shown in Graphic 3.

4.Attach refrigerator handle on opposite side of the refrigerator door with the two screws as shown in Graphic 2. Replace handle trim as shown.

5.Tighten all screws. Set aside the door until hinges and freezer compartment drawer are in place.

Freezer door

1.Remove freezer handle assembly as shown in Graphic 5-1. Keep all parts together.

2.Remove freezer door handle seal screw. Move to opposite side of freezer door.

3.Remove door stop. Move to opposite side of freezer door as shown in Graphic 4.

4.Attach handle to opposite side of freezer door.

5.Tighten all screws. Set aside door until bottom hinge is installed on product.

Replace Doors and Hinges

Style 1–Standard Door

NOTE: Graphics may be reversed if door swing is reversed.

Freezer drawer models

1.Replace the parts for the bottom hinge as shown. Tighten screws.

NOTE: Provide additional support for the door while the hinges are being moved. Do not depend on the door gasket magnets to hold the door in place while you are working.

2.Assemble the parts for the top hinge as shown in Top Hinge graphic. Do not tighten screws completely.

3.Adjust the door so that the bottom of the refrigerator door is aligned with the top of the freezer drawer. Tighten all screws.

Freezer door models

1.Replace the parts for the bottom hinge as shown. Tighten screws. Replace the freezer door.

NOTE: Provide additional support for the door while the hinges are being moved. Do not depend on the door gasket magnets to hold the door in place while you are working.

2.Assemble the parts for the center hinge as shown in the Center Hinge graphic, and tighten all the screws. Replace the refrigerator door.

3.Assemble the parts for the top hinge as shown in the Top Hinge graphic. Do not tighten the screws completely.

4.Adjust the doors so that the bottom of the refrigerator door is aligned with the top of the freezer door. Tighten all screws.

Style 2–French Doors

1.Assemble the parts for the top hinges as shown in Top Hinge graphic. Do not tighten the screws completely.

2.Replace the parts for the bottom hinges as shown in Bottom Hinge graphic. Tighten screws. Replace the refrigerator doors.

NOTE: Provide additional support for the refrigerator doors while the hinges are being moved. Do not depend on the door gasket magnets to hold the doors in place while you are working.

3.Align each door so that the bottom of the refrigerator door aligns evenly with the top of the freezer drawer. Tighten all screws.

4.Reconnect the wiring plug on top of the left-hand side refrigerator door.

5.Replace the top hinge covers.

Remove and Replace Freezer Drawer

IMPORTANT:

■Two people may be required to remove and replace the freezer drawer.

■All graphics are included later in this section after “Final Steps.”

Remove Drawer Front

1.Open the freezer drawer to full extension.

2.Loosen the four screws attaching the drawer glides to the drawer front. See Drawer Front Removal graphic.

NOTE: Loosen screws three to four turns. Keep the screws in the drawer front.

3.Lift drawer front upward and off the screws. See Drawer Front Removal graphic.

Replace Drawer Front

1.Slide the drawer glides out of the freezer compartment. Insert the screws in the top of the drawer front into the slots in the drawer brackets. See Drawer Front Replacement graphic.

2.Pull the drawer brackets toward you to insert the two screws in the bottom of the drawer front into the brackets. See Drawer Front Replacement graphic.

3.Completely tighten the four screws.

Final Steps

1.Check all holes to make sure that hole plugs and screws are in place. Reinstall top hinge cover as shown in Top Hinge graphic.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

2.Plug into a grounded 3 prong outlet.

3.Return all removable door parts to door and food to refrigerator.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Refrigerator User Instructions Refrigerator SafetyBefore You Throw Away Your Old Refrigerator or Freezer Installation InstructionsRemove the Packaging Clean Before Using Unpack the RefrigeratorElectrical Requirements LocationRequirementsRecommended Grounding Method Style Water Supply RequirementsConnect the Water Supply Reverse Osmosis Water SupplyRefrigerator Doorsand Drawer Style 2-French Doors Style 1-Standard DoorReplace Drawer Front Remove Drawer FrontStandard Door Freezer Door Door Swing Reversal optionalStandard Door Freezer Drawer Drawer Front Removal Drawer Front ReplacementDoor Removal & Replacement Style1-Freezer Door Models Adjust the DoorStyle 2-Freezer Drawer Models Crisper Humidity Control Using the ControlsRefrigerator USE Opening and Closing DoorsDispensing Water Ice MakerWater Dispenser Water Filtration SystemChanging the Light Bulb CleaningTo Clean Your Refrigerator Refrigerator CareTemperature and Moisture TroubleshootingRefrigerator Operation Ice and Water Water Filter Certifications Application Guidelines/Water Supply Parameters Product Data SheetsDisclaimer of Implied Warranties Limited WarrantyItems Excluded from Warranty This limited warranty does not coverEL Usuario DEL Refrigerador Seguridad DEL RefrigeradorAntes de tirar su viejo refrigerador o congelador Instrucciones DE InstalaciónDesempaque el refrigerador Requisitos de ubicaciónSuministro de agua por ósmosis inversa Requisitos eléctricosRequisitos del suministro de agua Método de conexión a tierra recomendadoConexión al refrigerador Conecte elsuministro de aguaEstilo Conexión a la línea de aguaEstilo 1-Puerta estándar Puertas y cajóndel refrigeradorEstilo 2-Dos puertas con congelador en la parte inferior Carcasa Cómo quitar las puertas y las bisagrasModelos con congelador de cajón Modelos con puerta en el congeladorCómo quitar y volver a colocar el cajón del congelador Para quitar el frente del cajónPara volver a colocar el frente del cajón Cómo volver a poner las puertas y las bisagras en su lugarPuerta estándar-Congelador con puerta Bisagra superiorPuerta estándar-Congelador de cajón Bisagra inferiorDos puertas con congelador en la parte inferior Bisagras superioresEstilo 1-Modelos de congelador con puerta Ajuste la puertaEstilo 2-Modelos con congelador de cajón Para encender/apagar USO DE SU RefrigeradorCómo abrir y cerrar las puertas Uso de los controlesCómo despachar agua Fábrica de hieloDespachador de agua Sistema de filtración de aguaPara limpiar su refrigerador Cuidado DE SU RefrigeradorLimpieza Cómo cambiar el focoFuncionamiento delrefrigerador Solución DE ProblemasHielo y agua Temperatura y humedad¿Está la presión de agua a por lo menos 35 lbs/pulg² Pautas de aplicación/Parámetros para el suministro de agua Hoja DE Datos DEL ProductoEsta garantía limitada no cubre Whirlpool CorporationGarantía Limitada Exclusiones DE LA GarantíaRéfrigérateur Sécurité DU RéfrigérateurAvant de jeter votre vieux réfrigérateur ou congélateur Instructions D’INSTALLATIONExigences demplacement Déballagedu réfrigérateurAlimentation en eau par osmose inverse Méthode recommandée de mise à la terreSpécificationsélectriques Spécifications del’alimentationen eauRaccordement à une canalisation d’eau Raccordement de la canalisation deauRaccordement au réfrigérateur Style 1-Porte standard Porteset tiroir du réfrigérateurStyle 2-Porte à deux battants Style-1 Porte standard Style 2-Portes à deux battants Réinstaller la façade du tiroirDéposer la façade du tiroir Porte standard Porte du compartiment de congélation Inversion du sens douverture des portes optionVis de charnière Portes à deux battants Charnières supérieuresStyle 1-Modèles de compartiments de congélation avec porte Ajustement de la porteStyle 2-Modèles avec tiroir de congélation Ouvertureet fermeture des portes Utilisation des commandesHumidity Control Commande dhumidité sur certains modèles Utilisation DU RéfrigérateurCONDITION/RAISON Ajustement Machine à glaçonsDistributeur d’eau Distribution d’eauNettoyage Remplacement del’ampoule d’éclairageEntretien DU Réfrigérateur Système de filtration de leauLe moteur semble trop tourner DépannageFonctionnement du réfrigérateur Le réfrigérateur ne fonctionne pasGlaçons et eau Température et humiditéLe réfrigérateur semble bruyant Heures pour la fabrication de nouveaux glaçons Système de filtration d’eau intérieur Feuilles DE Données SUR LE ProduitLa présente garantie limitée ne couvre pas Garantie DES Gros Appareils Ménagers Whirlpool CorporationGarantie Limitée Articles Exclus DE LA GarantieWhirlpool Corporation All rights reserved W10208432A EN/FR PN W10208431AW10297791
Top Page Image Contents