Cleaning the condenser
l
l
Personal Injury and
Product Damage Hazard
Be sure the ice maker is OFF and disconnected from the main power supply. Unit could suddenly start if not disconnected. Condenser fan rotation, sharp condenser fins, and hot tubing could cause personal injury.
Condenser fins can bend easily. Use care when vacuuming the condenser to keep from bending the fins.
Failure to follow the above precautions could result in personal injury or product damage.
1.Disconnect electrical power supply to the ice maker and turn the Cycle Control Knob to “OFF.”
2.Remove the two screws in the lower grille area and the one screw from the center of the front panel support. (Open bin door slightly for better access to screw.)
3.Pull forward and down to remove the lower access panel.
4.Remove dirt and lint from the condenser fins and the unit compartment with a brush attachment attached to a vacuum cleaner.
5.Replace the lower access panel and screws. The top of the access panel needs to be secured under the two metal tabs before replacing the screws.
6.Reconnect unit to electrical power supply, and turn the Cycle Control Knob to “ON.”
10