Changing the light bulb
Electrical Shock Hazard
Before removing the light bulb, either unplug the ice maker or disconnect the electricity leading to the ice maker at the main power supply.
Shock and injury can occur if electricity remains connected.
The ice maker has a light bulb in the top of the storage bin. To replace it, open the bin door and follow these instructions:
1.Disconnect ice maker from power supply.
2.Remove the two thumb screws and slide the ice cutter grid forward, out of the two slots near the water pan. Set the ice cutter grid on the bin door.
3.Press the front of the light shield in while pulling down to remove it from the light bracket.
4.Remove and replace with a
5.Replace the light shield, ice cutter grid, and two thumb screws.
6.Reconnect power supply.
8