Broan RM60000 manual Install Light Bulbs and Warming Lamps, Install Filters, Baffle Filters

Page 10

13. INSTALL LIGHT BULBS AND WARMING LAMPS

Install (2) heat lamp bulbs. Use BR40 size, 250 W max., infrared bulbs only (sold separately). Install (3) halogen light bulbs. Use PAR20 size, 50 W (sold separately).

14. INSTALL FILTERS

CAUTION

Remove protective plastic film covering filters before installing them.

It is recommended to install side filters first and finish with center one(s).

1.Insert upper end of filter into the hood (finger sized cup side).

2.Raise lower end toward the inside of hood.

3.Position lower end of filter into channel and pull.

4.Using finger sized cup, pull on the upper end of filter and slide it under the front inner retaining piece.

1

2

4

3

HD0065

HD0024

Replacement filters are available from your dealer. See label inside hood for size and part number.

Baffle Filters

Baffle filters are available as an option. To order them, refer to the table below to find the appropriate filter kit number to your hood. To install them, refer to instruction sheet included with baffle filter kit.

KIT #

HOOD WIDTH

RBF6030

30”

 

 

RBF6036

36”

 

 

RBF6042

42”

RBF6048

48”

RBF6054

54”

 

 

RBF6060

60”

RBF6066

66”

 

 

RBF6072

72”

 

 

HD0011

BAFFLE FILTER (TYPICAL)

- 10 -

Image 10
Contents RM60000 Series To Reduce the Risk of a Range TOP Grease Fire Never Pick UP a Flaming PAN-You may be burnedWarranty Series Hood Model RM326HOptional Soffit Chimney RMN Series Model RM325HRMP Series Select Blower Option and Install Ductwork Model HLB3, HLB6, HLB9 or HLB11Prepare the Installation Measure InstallationInstallation with Standard 18’’ High OVER-COOKTOP Cabinet Install the Hood Install Backsplash OptionalInstall Wood Mounting Strip Install Transition to ROUGH-IN Plate Interior Blower onlyInstall the Optional Soffit Chimney Install the ROUGH-IN Plate to the Hood ALL BlowersConnect the Wiring ALL Blowers Install the Blower Interior or Exterior BlowerInstall Filters Install Light Bulbs and Warming LampsBaffle Filters USE and Care Operation Service Parts QTY Hood Width Number DescriptionSérie RM60000 Afin DE Réduire LES Risques FEU DE CuisinièreTable DES Matières Garantie Limitée DE UN AN DE BROAN-NUTONEHotte Série Modèle RM326HPlaque Ventilateur Filtres À ChicaneRecouvrement de mur en acier COUVRE-CONDUIT Optionnel Série RMNFacultatif Modèle 331H, 332H, 335 OU Capuchon de toit Conduit rond De 10 po Ventilateur en ligneModèle HLB3, HLB6, HLB9 OU HLB11 Préparer L’INSTALLATION Mesurer L’INSTALLATIONInstallation Sous UNE Armoire Standard DE 18 PO DE Hauteur Installer LA Hotte Installer LE Dosseret OptionnelInstaller LA Lisière DE Bois Choisir L’OPTION Ventilateur Intérieur OU ExtérieurBranchement Électrique Tous LES Ventilateurs Installer LE COUVRE-CONDUIT OptionnelInstaller LE Ventilateur Intérieur OU Extérieur Série RMN OptionnelInstaller LES Filtres Installer LES Ampoules ET Lampes ChauffantesFiltres à chicane Entretien Fonctionnement 17. Pièces DE Rechange Pièce DescriptionSerie RM60000 Advertencia Índice DE Materias BROAN-NUTONE Garantía Limitada POR UN AÑOChimenea DE Intrados Opcional Serie RMN Campana Modelo RM326H VentiladorPlaca DEL Ventilador ventilador interior de 1200 pcm et Modelo RM325H VentiladorRemate de pared Ventilador exterior Redondo Modelo 331H, 332H, 335 O Seleccione LA Opción Ventilador Y Instale LOS ConductosModelo HLB3, HLB6, HLB9 O HLB11 Mida LA Instalación Prepare LA InstalaciónInstale LA Campana Instale LA Placa Para Antisalpicaduras OpcionalInstalación DE LA Tira DE Madera Seleccione LA Opción Ventilador Exterior O InteriorInstale EL Ventilador Interior O Exterior Conexión Eléctrica Todos LOS VentiladoresInstale LA Chimenea DE Intrados Opcional Serie RMN OpcionalInstale LOS Filtros Instale LOS Bombillas Y Lámparas TermógenaFiltros de zig zag Mantenimiento Funcionamiento Repuestos CTD Anchura DE LA Campana Pieza Descripción