6.0SERVICE (Continued)
The front burner shield should be removed to see the pilot. The pilot should be adjusted as follows:
Adjust the pilot burner flame
The pilot flame should envelop 3/8 to ½ inch [10 to 13 mm] of the
1. Remove the pilot adjustment cover screw. Refer to Figure 1.
2. Turn the inner adjustment screw |
| |
clockwise to decrease or |
| |
counterclockwise to increase the pilot | Figure 2 - Proper flame adjustment | |
flame. | ||
|
3.Always replace the cover screw after adjustment and tighten firmly to ensure proper operation.
PILOT ORIFICE SIZES: |
|
| |
MODEL |
| NATURAL | PROPANE |
.018 IN. | .010 IN. |
GAS PRESSURE REGULATOR
The gas pressure regulator is an integral part of the combination gas control located just behind the lower front access door. The pressure regulator adjustment is on the lower right side of the gas control (see Figure 1). The large slotted cap must be removed to access the adjustment screw.
23