Blodgett BG2136 manual Electrical specifications for gas ovens per oven cavity

ENGLISH

							SECTION1-DESCRIPTION
Table 1-3: Electrical specifications for gas ovens (per oven cavity)
Main Blower	Control				Current
Voltage	Circuit	Voltage	Phase	Freq.	Draw	Poles	Wires
208/240V	120V conv.	speed control	1 Ph	50/60 Hz	6A *	2 Pole	3 Wire (2 hot, 1 gnd)

&drive motor; all others as per line (208/240V)

* The current draw shown above is an average value for normal operation. The initial amperage draw on oven startup may exceed the listed value.

Table 1-4: Gas orifice and pressure specifications (per oven cavity) - Domestic and standard export ovens

				Orifice (Manifold)
Gas Type	Main Orifice I.D.	Bypass Orifice I.D.	Supply (Inlet) Pressure	Pressure
Natural	0.0935” (2.3749mm, #42 drill)	0.0810” (2.0574mm, #46 drill)	6-12” W.C. (14.9-29.9mbar) *	4.0” W.C. (9.93mbar)
Propane	0.081” (2.0574mm, #46 drill)	0.052” (1.3208mm, #55 drill)	11-14” W.C. (27.4-34.9mbar) *	10.5” W.C. (26.15mbar)

*The gas supply pressures and orifice sizes shown are for ovens installed in North America. The required gas supply pressures and orifice sizes of ovens installed in other locations are dependent on the local gas type and on all applicable local codes.

Table 1-5: Gas orifice and pressure specifications (per oven cavity) - CE ovens

Supply (Inlet) Pressure

IT,PT,ES,SE,

M a i n

UK,CH,IT,AT,

SE,CH,AT,DK,

BE,IE,IT,PT,

Orifice

Rated

Gas

Orifice

DK,FI

NL

DE

BE,FR

FI,DE,NL

ES,UK

(Manifold)

Heat

Type

dia .

I 2 H

I 2L

I 2E

I 2E+

I 3 B / P

I3+

Pressure

Input

G20

2.3749

20

--

20

20

--

--

11.21

22.36

mm

mbar

mbar

mbar

mbar

kW-hr.

G25

2.3749

--

25

--

--

--

--

16.19

22.36

mm

mbar

mbar

kW-hr.

G30

1.3970

--

--

--

--

29 or 50

28-30, 37

26.2

22.59

mm

mbar

or 50 mbar

mbar

kW-hr.

IMPORTANT

Additional electrical information is provided on the oven's serial plate, and on the wiring diagram inside the machinery compartment.

2