ResMed 100 Setup menu Clinical Settings Mask Type, Setup menu Alarm Settings Alarm Volume

Page 21

Setup menu

Setup menu: Clinical Settings (Mask Type)

1Press to display the Clinical Settings screen.

2Use the push dial to scroll through the menu and change the Mask Type in the Advanced Settings screen.

Mask type options: Nasal, Ultra, Pillow, Full Face, Trach, Pediatric.

Note: When Mask Type is set to Trach or Full Face the Non-Vented Mask alarm automatically turns on.

For a full list of compatible masks for this device, see the Mask/Device Compatibility List on www.resmed.com on the Products page under Service & Support. If you do not have internet access, please contact your ResMed representative.

Setup menu: Alarm Settings (Alarm Volume)

1Press to display the Alarm Settings screen.

2Use the push dial to scroll through the menu and change the Alarm Volume to low, medium or high.

Setup menu: Options

1Press to display the Options screen.

2Use the push dial to scroll through the menu and change parameters (see descriptions in the table below).

16

Image 21

Contents User Guide StellarRespiratory Care Solutions Making quality of care easy Stellar 100 Stellar Contents Data management Cleaning and maintenance Indications for use IntroductionContraindications Adverse effectsStellar at a glance Patient interface Internal batteryHumidification ResMed USB stickSetting up for noninvasive use Remote AlarmMobile use Attaching the H4i heated humidifier for noninvasive use Setting up for invasive useHmef Working with other optional accessories Attaching the pulse oximeterAdding supplemental oxygen Starting therapy using oxygen Stopping therapy using oxygenUsing the FiO2 monitoring sensor Attaching an antibacterial filter Connecting a sensorAbout the control panel Stellar basicsStarting therapy LCD screenPerforming a functional test Stopping therapy Starting therapyWorking with alarms Turning off the powerUsing mask-fit Tailoring treatment setup optionsUsing the menus Setup menu Clinical Settings Mask Type Setup menuSetup menu Alarm Settings Alarm Volume Setup menu OptionsSetup menu Configuration Menu Parameter DescriptionOptions On, Auto Event Summary Info menuUsed Hours Device InformationCleaning and maintenance Data managementDaily Weekly MonthlyReplacing the air filter Multipatient use DisinfectionAlarm troubleshooting TroubleshootingProblem / possible cause Action LCD Internal Battery Empty ServicingLCD High Temperature 10, 11, 12 Problem / possible cause ActionLCD Over Pressure LCD Blocked TubeLCD High Leak LCD Internal Battery LowLCD Non-Vented Mask LCD ApnoeaOther troubleshooting Device does not start when you breathe into the mask Device does not stop when you remove your maskLearn Circuit failed Technical specifications Dimensions L x W x H Alarm Volume RangeWeight Air outlet Power supplyIEC ClassificationsAir travel requirements Page Vrms Symbols Mask should never be blocked General warnings and cautionsPage Product Warranty period Limited warrantyRespiratory Care Solutions Making quality of care easy EUR1 ENG