When CD, AUx, VIDEO 1, VIDEO 2 (“V2/ IPOD”) is selected as an input source
4. Select the digital or analog input connected as desired.
•Each time this button is pressed, the corresponding input is selected as follows :
→c(oaxial)1 → c2 → o1 → H(HDMI audio)* → A(nalog)
*: When CD is selected, the HDMI audio input cannot be selected.
■Notes:
•When tuner, F.AUX is selected as an input source, the digital input cannot be selected.
•When the selected digital input or HDMI input is not connected, the “DIGITAL” or “HDMI” indicator flickers and the analog input is automatically selected.
5.Operate the selected component for playback.
•When playing back the program sources with surround sound, refer to “ENJOYING SURROUND SOUND” on page 22.
6. Adjust the (overall) volume.
■Note:
•For safe amplifier operation, the maximum level may vary depending on the program source, surround mode, etc.
muting the sound
•“MUTE” is displayed.
•To resume the previous sound level, press it again.
Listening with headphones
• Be sure to switch speakers off.
■Note:
•Be careful not to set the volume too high when using headphones.
ENGLISH
19