Sherwood RD-8601 When CD, VIDEO 1~3 is selected as, an input source, English

When CD, VIDEO 1~3 is selected as			7	To compensate for edgy or shrill movie
an input source				sound tracks.
	Select the digital or analog input connected			CINEMA EQ
4
	as desired.
		DIGITAL
		INPUTS
			• Then “C-EQ OFF” is scrolled.
			• Press it again to work, the “C-EQ ON” is scrolled.
			• When 96 kHz PCM(2 CH stereo) signals are input
			or the SPEAKER button is set to off, the cinema EQ
• Each time this button is pressed, the corresponding			function does not work.
input is selected as follows ;
A(nalog) o(ptical) 1 o(ptical) 2				To mute the sound.
	c(oaxial) 2	c(oaxial) 1	8
• When TUNER, TAPE, AUX or EXTERNAL IN is
selected as an input source, the digital input cannot
be selected.
				MUTE
Notes :
• When the selected optical or coaxial digital input is
not connected, the “DIGITAL” indicator flickers,
meaning no sound. (Refer to “ENJOYING
SURROUND SOUND” on page 30.)
• The sound from the component connected to the
selected digital input can be heard regardless of the			• “MUTE” will flicker.
selected input source.			• To resume the previous sound level, press it again.
5	Operate the selected component for		9	To listen with the headphones.
	playback.			PHONES

• When playing back the program sources with surround sound, refer to “ENJOYING SURROUND SOUND” on page 30.

6	Adjust the (overall) volume.
			• Ensure that the SPEAKER button is set to off.
			• Depending on the signal format which is being input,
			you can listen in different Dolby Headphone modes,
MASTER VOLUME			stereo mode, etc. with pressing the DSP MODE (<)
		VOLUME	/ (>) buttons.(For details, refer to “Listening in a
	or		Dolby Headphone mode” on page 31).
DOWN	UP

ENGLISH

26