Sherwood RD-8601 Listening To Radio Broadcasts, Auto tuning, Manual tuning, English

ENGLISH

LISTENING TO RADIO BROADCASTS

Auto tuning			2	Select the desired band.
				BAND
1	Select the tuner.
						MHz
	INPUT SELECTOR
	AUDIO			BAND	FREQUENCY
		or	• Each time this button is pressed, the band is changed
			to FM or AM.
		TUNER	• When pressing the BAND button without selecting
		1
			the TUNER, the tuner will be selected automatically.
3	Select the auto tuning mode.		4	Press the TUNING/PRESET		buttons
				briefly or press the TUNE +/- buttons for
				more than 0.5 second.
	T/P MODE
				TUNING/PRESET
				or	TUNE	TUNE
• Each time this button is pressed, the mode changes			• The tuner will now search until a station of sufficient
as follows;			strength has been found. The display shows the tuned
Auto tuning mode		Manual tuning mode	frequency and “TUNED”.
(“AUTO” lights up)		(No indication)	• If the station found is not the desired one, simply
Preset tuning mode(“PRESET” lights up)			repeat this operation.
			• Weak stations are skipped during auto tuning.
			• When pressing the TUNE +/- buttons for more than
			0.5 second on the remote control, you need not select
			the auto tuning mode on step .
Manual tuning			Presetting radio stations
• Manual tuning is useful when you already know the			• You can store up to 30 preferred stations in the memory.
frequency of the desired station.				Tune in the desired station with auto or
• Select the manual tuning mode performing the steps			1
				manual tuning.
to	in “Auto tuning” procedure and press the
TUNING/PRESET		/ or TUNE +/- buttons
repeatedly until the right frequency has been
reached.				Press the MEMORY/ENTER button.
• When pressing the TUNE +/- buttons repeatedly on			2
the remote control, you need not select the manual
tuning mode on step		in “Auto tuning” procedure.
				MEMO/ENTER
TUNING/PRESET				or	ENTER

or

TUNE TUNE

• “MEM” is flickering for several seconds.

35