Sherwood RD-8601 operating instructions Digital Audio Recording With Md Recorder, English

Start recording on the VIDEO 1.

3

Start play on the VIDEO 2 and the CD

4 respectively.

• The audio signal from the CD and the video signal from the VIDEO 2 will be dubbed and you can enjoy them on the TV set and from the speakers. Note : Be sure to observe the order of the above steps

and .

ENGLISH

DIGITAL AUDIO RECORDING WITH MD RECORDER

•Only when the OPTICAL DIGITAL OUT of this receiver is connected to the OPTICAL DIGITAL IN of the MD recorder or CD recorder, you can enjoy high-quality sound of digital recording without converting the original signals. Refer to “CONNECTING VIDEO COMPONENTS”, “CONNECTING AUDIO COMPONENTS” and “CONNECTING DIGITAL INs and OUT” on pages 6~7 and the operating instructions of the MD recorder or CD recorder.

Notes:

•Digital recording is available for the digital audio program sources such as CDs, MDs, some DVDs, etc.

•In most DVDs as well as some CDs, etc., digital recording may not be available depending on the signal format.

•There are some restrictions on recording digital signals. When making digital recordings, refer to the operating instructions of your digital recording equipment to know what restrictions are imposed.

1	Select a desired input of CD, VIDEO 1~3				2	For digital recording, select the desired
	as a recording source.					digital input as recording signal input.
						DIGITAL
						INPUTS
INPUT SELECTOR
AUDIO	VIDEO
		CD
		2
	or	VIDEO 1	VIDEO 2	VIDEO 3	• Each time this button is pressed, the corresponding
		6	7	8	input is selected as follows:
					A(nalog) o(ptical) 1 o(ptical) 2
						c(oaxial) 2 c(oaxial) 1
					Note : When the selected digital input is not
						connected, “DIGITAL” indicator flickers.
						There will be no recording as well as no sound.
3	Start recording on the component				4	Start play on the desired input.
	connected to OPTICAL DIGITAL OUT.

38