Sherwood RD-8601 Memorizing the adjusted channel levels, English, the ENTER button

ENGLISH

Memorizing the adjusted channel levels

•You can memorize the adjusted channel levels into preset memory(“REF. 1”, “REF. 2”) and recall the memorized whenever you want.

1	After performing the steps ~ in “Adjusting the current channel level” procedure on page 48, press
	the ENTER button.
	• The “1” of “REF. 1” indication flickers.
	ENTER

2	Press the CURSOR LEFT( )/RIGHT( ) buttons to select the desired preset memory, then press
	the ENTER button.
	• Each time the CURSOR LEFT( ) or RIGHT( )
	button is pressed, “REF. 1” or “REF. 2” is selected.
	• The adjusted channel levels has now been
	memorized into the selected memory.
	ENTER

Recalling the memorized channel levels	2	Press the CURSOR LEFT( )/
		RIGHT( ) buttons to select the desired
Press the CURSOR UP( )/DOWN( )		one of REF. 1 and REF. 2.
1 buttons to select the preset memory mode.

• “USER” may be displayed instead of “REF. 1” or	• Then the channel levels memorized into the
“REF. 2”.	selected preset memory are recalled.

49