●T~ PROBLEMSOLmR
(continued)
PROBLEM
SURFACE~S WLL NOT MMNTMN A ROLL~G BOE OR FR~G RATE IS NOT FAST ENOUGH
COOKTOP FEELS HOT
POSS~LE CAUSE
●You must use pans which are absolutely flat. If light can be seen between the pan bottom and a straight edge, the units will not transfer heat properly.
●Pan bottoms should closely match the diameter of the surface unit selected.
●Because the units heat by conduction, the cooktop surfaces may seem hotter than you are used to. This is normal. Make sure
FOODS COOK SLOWLY ● Improper cookware being used. Pan bottoms should be flat, fairly heavy weight and the same diameter as the surface unit selected.
SURFACE UNTS DO NOT WORK PROPEMY
SOLD DISK SURFACE UNTS NOT FUNCTIONING PROPERLY
SOLD DISK SURFACE ~TS
SMOKE W~E HEA~NG
●Difficulty may be in the main distribution panel of your house, caused by a blown
(a
NOTE: Apartment tenants or condominium owners should ask their building management to perform this check before calling for service.
●Cooktop surface unit controls are not properly set, or the wrong control knob is set for the surface unit you are using.
●Solid disk surface unit controls are not properly set.
●Use proper
●Some smoke and odor is normal when using solid disk surface units for the first time and also after using Cello Electrol@cleaner.
H you need more help.. .c*l, toll free: GE Answer Centera
800.626.2000
consumer information service
34