Installation Instructions

GE JGB918, JGBP88 manual Installation Instructions, Electrical Connections in this section

WARNING!

INSTALLATION SAFETY INSTRUCTIONS

Read these instructions completely and carefully.

Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to this manual. For assistance or additional information, consult a qualified installer, service agency, manufacturer (dealer) or the gas supplier.

Never reuse old flexible connectors. The use

of old flexible connectors can cause gas leaks and personal injury. Always use NEW flexible connectors when installing a gas appliance.

IMPORTANT – Remove all packing material and literature from oven before connecting gas and electrical supply to range.

CAUTION – Do not attempt to operate the oven of this range during a power failure (Electric Ignition models only).

■Have your range installed by a qualified installer.

■Your range must be electrically grounded in accordance with local codes or, in the absence of local codes, in accordance with the National Electrical Code (ANSI/NFPA 70, latest edition). In Canada, electrical grounding must be in accordance with the current CSA C22.1 Canadian Electrical Code Part 1 and/or local codes. See

Electrical Connections in this section.

■Before installing your range on linoleum or any other synthetic floor covering, make sure the floor covering can withstand 180°F without shrinking,

warping or discoloring. Do not install the range over carpeting unless a sheet of 1/4″ thick plywood or similar insulator is placed between the range and carpeting.

■Make sure the wall coverings around the range can withstand heat generated by the range up to 200°F.

■Avoid placing cabinets above the range. To reduce the hazard caused by reaching over the open flames of operating burners, install a ventilation

hood over the range that projects forward at least 5″ beyond the front of the cabinets.

■The ventilating hood must be constructed of sheet metal not less than 0.0122″ thick.

Install above the cooktop with a clearance of not less than 1/4″ between the hood and the underside of the combustible material or metal cabinet. The hood must be at least as wide as the appliance and centered over the appliance. Clearance between the cooking surface and the ventilation hood surface MUST NEVER BE LESS THAN 24

INCHES.

EXCEPTION: Installation of a listed microwave oven or cooking appliance over the cooktop shall conform to the installation instructions packed with that appliance.

■If cabinets are placed above the range,

allow a minimum clearance of 30″ between the cooking surface and the bottom of unprotected cabinets.

■If a 30″ clearance between cooking surface and overhead combustible material or metal cabinets

cannot be maintained, protect the underside of the cabinets above the cooktop with not less than 1/4″

insulating millboard covered with sheet metal not less than 0.0122″ thick. Clearance between the cooking surface and protected cabinets MUST

NEVER BE LESS THAN 24 INCHES.

■The vertical distance from the plane of the cooking

surface to the bottom of adjacent overhead cabinets extending closer than 1″ to the plane of the range sides must not be less than 18″. (See the Dimensions and Clearances illustration in this section.)

■CAUTION – Items of interest to children should not be stored in cabinets above a range or on the backsplash of a range—children climbing on the range to reach items could be seriously injured.

JGB918, JGBP88 specifications

The GE JGBP88 and JGB918 are notable models in the realm of gas ranges, designed to meet the culinary needs of modern home cooks. Both appliances offer a wealth of features and cutting-edge technologies, enhancing cooking efficiency and convenience in the kitchen.

The GE JGBP88 is a freestanding gas range that stands out for its stylish appearance and practical design. One of its main features is the sealed burners, which ensure even heat distribution and make cleaning effortless, as spills won't flow underneath the burners. This model typically offers a powerful 18,000 BTU burner, ideal for rapid boiling and searing, along with multiple simmer burners that provide precision control for delicate sauces or melting chocolate.

Another significant characteristic of the JGBP88 is its spacious oven capacity, often reaching around 5.0 cubic feet. It includes features like a self-cleaning option, which helps maintain the oven's interior with minimal effort. The oven also incorporates an interior oven light, allowing users to monitor cooking progress without opening the door and losing heat.

The GE JGB918 builds upon this foundational set of features while incorporating advanced technology. It frequently includes a convection oven option, which promotes even cooking results by circulating hot air throughout the oven. This feature is particularly advantageous for baking and roasting, as it can significantly reduce cooking times and enhance the quality of baked goods.

Moreover, the JGB918 often features WiFi connectivity, allowing users to control and monitor their oven remotely through a smartphone app. This smart feature enables cooks to preheat the oven, adjust cooking times, and receive alerts when their dish is ready, seamlessly integrating convenience with modern technology.

In terms of design, both the JGBP88 and JGB918 are available in various finishes, allowing them to complement any kitchen aesthetic. Their intuitive control knobs and touch pad make operation user-friendly, catering to chefs of all skill levels.

Overall, the GE JGBP88 and JGB918 gas ranges represent a fusion of innovative technology, practical features, and stylish design, making them essential appliances for any home chef looking to elevate their cooking experience.