a/ OPEM~G T~
After a Clean Cycle
1.When the Oven Cleaning Light is off, turn the OVEN TEMP knob to OFF.
2.Turn the OVEN SET knob to OFF. The door will automatically unlatch and all signal lights will be off.
SELF-CLEAMG OWN
(continued)
NOTE: If you wish to start and stop clean at a later time than shownon the clock,push in and turn the START dial to the time you wish to start. Add the hours needed for the cleaning to this start time, then push in and turn the STOP (CLEAN) dial to the desired time. The oven will automatically turn on and off at the set times.
To Stop a Clean Cycle
CAUTION: After setting the oven for a clean cycle, do not try to open the oven door as this can damage the automatic
U you want to use the oven any time before a clean cycle is done, turn the OVEN SET and the OVEN TEMP knobs to OFF. After the oven cools, the door will udock and can then be opened. CAUTION: Should the oven door become locked accidentally, to open the door, turn the OVEN SET knob back to CLEAN, push in and advance the STOP dial past the time of day. Wait one minute then turn the OVEN SET knob to OFF. Wait a few seconds and the door may be opened.
H the door latch finger becomes positioned so as to keep the oven door from closing all the way, this can be corrected as follows:
●Make surethe oven is cool.
●Open the oven door, turnthe OVEN SET knob to CLEAN. Push in and advance the STOP dial past the time of day. Push in the oven interlock button (button is at the right top of the oven door opening) and hold the button in for about 15 seconds.
●Next, turn the OVEN SET knob to OFF and again push in the oven interlockbutton for about 15 seconds. The latch finger, being motor driven, will turn so the oven door may be closed.
Questionsand Answers
Q. ~ my oven clock is not set to the correct time of day, can I still
A. If the clock is not set to the correct time of day you will not be able to set a delay clean to end at a specific time.
Q. Is the “cracUing” or ‘~opping” sound I hear during cleaning normal?
A.Yes.Thisis thesound of the meti heatingand cookg during both the cooking and cleaning functions.
Q.My oven shelves do not sfide easily. What is the matter?
A.After cleaning, oven shelves will become so clean they do not slide easily. To make the shelves slide more easily, after each
Q.What causes the
A.This is a normal condition, resulting from heating and cooling during cleaning. These lines do not affect how your oven performs.
Q.Should there be any odor during the cleaning?
A.Yes, there will be an odor during the first few cleanings. Failure to wipe out excessive soil might also cause a strong odor when cleaning.
Q. Why do I have ash left in my oven after cleaning?
A. Some types of soil will leave a deposit which is ash. It can be removed with a damp sponge or cloth.
Q. What should I do if excessive smoking occurs during cleaning?
A. This is caused by excessive soil. Turn the oven off. Open the windows to rid the room of smoke. Wait until the oven has cooled and the word “LOCK’ is off in the display. Wipe up the excess soil and reset the clean cycle.
Q. Can I use commercial oven cleaners on any part of my
A. No cleaners or coatings should be used around any
part of this oven. If you do use them and do not thoroughly rinse the oven with water, wiping it absolutely clean afterwards, the residue can scar the oven surface and damage metal parts the next time the oven is automatically cleaned.
Q. My oven shelves have become gray after the
A.Yes. After the
Q.Why won’t my oven clean immediately even though I have set all the time and clean knobs correctly?
A.Check to be sure that your START dial is set to the same time as the oven clock.
22