R E P L A C I N G P A R T S
CHARCOAL FILTER
Charcoal Filter, Sharp part number
1.Disconnect power to the oven at the circuit breaker panel or by unplugging.
2.Remove the three louver mounting screws and push down carefully on the tab at each end of the louver to disengage it. (See illustration.)
3.Pull the louver away from the unit.
4.Change the charcoal filter.
5.Carefully push the louver back into place (engaging both the bottom and top tabs) and replace the screws removed in step 2.
Top tab
Louver
Charcoal filter
(white side faces front)
Screw
Screw
Bottom tab
LIGHT BULBS
1.To replace light bulbs, first disconnect power to the oven at the circuit breaker panel or by unplugging.
2.To release cover, remove the screw on the light cover. (See illustration.)
3.Replace light bulbs with equivalent watt bulb available from your Sharp Authorized Servicer or parts distributor. Bulbs are also available at most hardware stores or lighting centers. DO NOT USE A BULB LARGER THAN 30 WATTS.
4.Close light cover and secure with screw removed in step 2.
CAUTION: Light cover may become very hot. Do not touch glass when light is on.
Light cover
Light bulbs | Screw |
Screw
34