Jura Capresso ENA 3, ENA 5, ENA 4, 68191 warranty PLEASE, do, Factory Settings

Page 12

Never fill frozen beans into the bean container. If you store beans in the freezer, let them thaw 3 to 4 hours before filling them into the bean container.

Never fill anything other than coffee beans into the bean container (no chocolate, rice, nuts, spices, etc.)

Never fill anything but fresh, cold clean water into the water container, except when decalcifying (chapter 18.3).

Never use mineral or carbonated water. You can use tap water, bottled water, spring water, distilled water and reverse osmosis water.

Never repair or open the machine yourself. All repairs should be performed only by an authorized service center.

Do not place the machine on a surface which is sensitive to hot or cold water and steam.

PLEASE, DO...

Fill water tank with fresh, cold water only.

Remove any foreign particles (small stones) from coffee beans.

Let frozen beans thaw 3 to 4 hours before pouring them into the bean container.

5. FACTORY SETTINGS

Each machine leaves the factory with the following pre-sets:

1 Cup – 5 OZ., temp. HIGH, coffee strength (flavor): NORMAL

2 Cups – 5 oz.(per cup), temp. HIGH, strength (flavor) STRONG

ADJUSTABLE SETTINGS 1 cup from 0.5 to 8 oz.

2 cups from 0.5 to 8 oz. per cup

Note: when using the 2-cup option, ENA will always grind in the STRONG setting.

Please note: You can change all above pre-sets (chapter 14a). You can also override the strengths and the cup size before/ during actual brewing. Overriding will not change the preset values (chapter 9d).

Other functions are set as follows (to change functions refer to

listed chapters.)

 

chapter

Filter (Clearyl)

– not installed

17.1

Hardness Level

10º dH

16.1

Auto-Off

2 Hours

20

Grinder Fineness

Middle position ....

7

Energy Saving

– not set

19

Unit (Volume)

in OZ

21

Language

English

22

3-Color Display

The ENA features a 3-color alpha-numeric display. This facilitates the use even more.

Green: ENA is ready to prepare a beverage or is in the process of preparing a beverage.

Red: ENA is requiring some kind of action from you to get back to the green display (e.g. FILL WATER TANK)

Yellow: ENA is in programming mode (you pushed the P button). To get out of the programming mode, push the P button again and the display will show the previous information.

6. PREPARING ENA FOR THE FIRST TIME Make sure

all accessories, literature, caution leaflets etc. are removed from the machine, the water tank, and the bean container.

the Clearyl Water Filter is NOT installed!

the machine sits on a flat, even surface and the drawer, tray and used coffee container are inserted (Fig. 1, 12-13).

12.

Image 12
Contents ENA Important Safeguards Customer Service Jura-CapressoAccessories ENA Dual Frother Plus Milk Table of Contents Installing and activating the Clearyl filter Clearyl Water Filter CartridgeWelcome to ENA PLEASE, DON’T... or you void your warranty protection BEAN-TO-CUP / Crema Coffee High Pressure BrewingDifferent Coffee Drinks Coffee FactsFactory Settings PLEASE, doTurning the Machine on Filling the Water TankAbout Coffee Beans Filling the Bean ContainerAdjusting the Grinder 7a. Coffee Strength FlavorDaily Preparation Grinding and Brewing Coffee BeveragesUsing PRE-GROUND Coffee 9b. Brewing ONE CUP9c. Brewing TWO Cups The display shows Ready 9d. Overriding CUP Size and Coffee StrengthUsing HOT Water GroundCappuccino and Latte Recommendation12a. Using the Dual Frother Plus 12b. Cleaning the Dual Frother PlusFast cleaning Tips for frothing CappuccinoThorough cleaning of the Dual Frother parts Using the Frothxpress System ENA 5 standard equipment13a. Making Cappuccino and Latte Making one Cappuccino 13d. Rinsing and Cleaning the Frothxpress 13b. Hotter Milk with Frothxpress13c. Making HOT Chocolate and Cafe Mocha RinsingProduct FilterHardness EnergyRinse 14b. Visual Programming of CUP SizeWater Care Water Hardness MonitorChanging the Water Hardness Monitor Ready Clearyl Water Filter CartridgeClearyl cartridge HEATING. Ready Manual Clearyl Replacement Automatic Cleaning Cycles 18.1 Cleaning with Special TabletClean / Ready Do not LET the Clearyl Filter DRY OUTManual Tablet Cleaning Cycle Empty TrayDecalcifying DE-SCALE /READYManual Decalcifying Rinse CYCLE, ManuallyEnergy Saving Mode Changing the AUTO-OFF SettingChanging the AUTO-OFF setting e.g. from 2 HRS to 4 HRS Changing from OZ to ML UnitClose TAP Clean Tray MissingFill Beans Fill Water TankError Messages Error Grinder Makes AN Extremely Loud Noise no Beans are GroundSupplies This Warranty does not Cover Other limitations and exclusionsJura-Capresso, LLC