Jura Capresso ENA 3, ENA 5 Product, Filter, Hardness, Energy, OFF After, Unit, Language, Exit

Page 20

Place a cup underneath the frothXpress and place a cup with some cold water next to the machine.

Insert the milk hose into this cup (Fig. 23).

Point the frothXpress dial to the 12 o’clock position. READY.

Turn the Rotary Dial until STEAM is displayed and push the Rotary Dial. The display shows HEATING.

When the display shows READY, turn the Selector Switch to the hot water/steam position. The display shows STEAM. The frothXpress starts siphoning the cold water through the frothXpress removing milk deposits. After a few seconds, turn the Selector Switch to the coffee position to stop. READY.

CLEANING WITH CAPPUCCINO CLEANER

If you use the frothXpress extensively or forgot to rinse the frothXpress, it is possible that milk deposits starts building up inside the frothXpress. The ENA 5 comes with a bottle of "Cappuccino Cleaner". This is the fastest and easiest way to remove any milk residue from the frothXpress.

Remove the frothXpress from the steam nozzle and take it apart (Fig. 22).

Place all parts including the hose in a cup with warm water and add one cap-full (15 ml or 1/2oz.) of the "Cappuccino Cleaner".

Let sit for at least ten minutes or overnight.

Rinse all parts under fresh water and assemble.

14. PROGRAMMING

The ENA provides programming, rinsing and cleaning functions. You can access these functions as follows.

READY

Push and hold the P button (Fig. 4) until display shows RINSE. Turn the Rotary Dial clockwise to see the following functions after RINSE:

PRODUCT

• reprogram cup size, strength and temperature to your liking, see chapter 14a

FILTER -

indicates if the Clearyl filter is installed or not; see chapters 17 to 17.4

HARDNESS

• adjust the ENA to your specific water, see chapters 16 and 16.1

ENERGY –

set the ENA to use less energy, see chapter 19

OFF AFTER

set to different auto-off intervals, see chapter 20

UNIT

show the volume either in milliliters or ounces, see chapter 21

LANGUAGE

select any of seven different languages, see chapter 22

EXIT

push the Rotary Dial to get back to READY

14a. PROGRAMMING CUP SIZE, STRENGTH, TEMPERATURE You can permanently change the Cup Size, the Strength (FLAVOUR) and the temperature for your coffee beverages. Example: Change the setting for 1 CUP from:

NORMAL strength, 5 OZ and HIGH temperature to

STRONG strength, 3 OZ and NORMAL temperature

READY

20.

Image 20
Contents ENA Important Safeguards Customer Service Jura-CapressoAccessories ENA Dual Frother Plus Milk Table of Contents Installing and activating the Clearyl filter Clearyl Water Filter CartridgeWelcome to ENA PLEASE, DON’T... or you void your warranty protection BEAN-TO-CUP / Crema Coffee High Pressure BrewingDifferent Coffee Drinks Coffee FactsFactory Settings PLEASE, doTurning the Machine on Filling the Water TankAbout Coffee Beans Filling the Bean ContainerAdjusting the Grinder 7a. Coffee Strength FlavorDaily Preparation Grinding and Brewing Coffee BeveragesUsing PRE-GROUND Coffee 9b. Brewing ONE CUP9c. Brewing TWO Cups The display shows Ready 9d. Overriding CUP Size and Coffee StrengthUsing HOT Water GroundCappuccino and Latte Recommendation12a. Using the Dual Frother Plus 12b. Cleaning the Dual Frother PlusFast cleaning Tips for frothing Cappuccino13a. Making Cappuccino and Latte Making one Cappuccino Thorough cleaning of the Dual Frother partsUsing the Frothxpress System ENA 5 standard equipment 13d. Rinsing and Cleaning the Frothxpress 13b. Hotter Milk with Frothxpress13c. Making HOT Chocolate and Cafe Mocha RinsingProduct FilterHardness EnergyRinse 14b. Visual Programming of CUP SizeWater Care Water Hardness MonitorClearyl cartridge Changing the Water Hardness Monitor ReadyClearyl Water Filter Cartridge HEATING. Ready Manual Clearyl Replacement Automatic Cleaning Cycles 18.1 Cleaning with Special TabletClean / Ready Do not LET the Clearyl Filter DRY OUTManual Tablet Cleaning Cycle Empty TrayDecalcifying DE-SCALE /READYManual Decalcifying Rinse CYCLE, ManuallyEnergy Saving Mode Changing the AUTO-OFF SettingChanging the AUTO-OFF setting e.g. from 2 HRS to 4 HRS Changing from OZ to ML UnitClose TAP Clean Tray MissingFill Beans Fill Water TankSupplies Error Messages ErrorGrinder Makes AN Extremely Loud Noise no Beans are Ground This Warranty does not Cover Other limitations and exclusionsJura-Capresso, LLC