9b. Brewing ONE CUP, Using PRE-GROUND Coffee

9b. BREWING ONE CUP

If you press the Rotary Dial, the ENA will produce a 5 oz. cup of coffee in normal strength. READY, NORMAL, 1 CUP, READY ENA 5 only: If you brew one cup we recommend turning the coffee spout to the one-cup position (Fig. 9). Coffee will flow from one spout into your cup.

9c. BREWING TWO CUPS The display shows READY.

•Turn the Rotary Dial until the display shows 2 CUPS and press the Rotary Dial. The display shows 2 CUPS and starts grinding and brewing. READY.

Please note: When selecting 2 CUPS the ENA will always grind in position STRONG and will double the programmed volume, e.g. if the programmed volume is 5 oz. the ENA will brew a total of 10 oz. of coffee.

Note: After brewing 2 cups the ENA will always return to the 1 cup mode.

ENA 5 only: When using two cups, make sure the coffee spout is turned to the 2-cup position (Fig. 10).

9d. OVERRIDING CUP SIZE AND COFFEE STRENGTH

If you want to brew a different cup of coffee just once you can override the propgrammed strength and volume before brewing. This is convenient when you desire a stronger or milder cup of coffee or a guest wants the coffee prepared differently.

•Turn the Rotary Dial. It will show you the following options: MILD, NORMAL, STRONG, STEAM, 2 CUPS. If you do not

select any of these options, the display will return to READY after approx. 7 seconds.

Example: To prepare a STRONG. 2 OZ espresso. READY.

•Turn the Rotary Dial to STRONG and push the Rotary Dial. The display shows STRONG and starts grinding. 1 CUP.

•When the area around the Rotary Dial lights up in red, turn the dial and select 2.0 OZ. The display changes from 2.0 OZ to 1 CUP and the ENA will brew 2 oz. of coffee. READY.

The next time you push the Rotary Dial, the ENA will brew according to the pre-programmed setting.

Please note: When you select the 2 CUP setting (chapter 9c.) you can only override the cup size by turning the dial during brewing. The size shown is always per cup (e.g. if you choose 3 oz., the ENA will brew a total of 6 oz.).

10. USING PRE-GROUND COFFEE

You can also use pre-ground coffee, bypassing the grinder. This is convenient if someone requests decaf, or flavored coffee.

Important:

•Never add more than two level measuring spoons of pre- ground coffee.

•Never fill the funnel with instant coffee.

•If the pre-ground coffee is ground too fine, it can block the system. No or very little coffee will come through the coffee spouts.

•If you fill less than 1/2 a measuring spoon of coffee into the funnel the display will show NOT ENOUGH PRE-GROUNDand the ENA will stop the operation and return to READY.

15.