Jura Capresso ENA 5, ENA 3, ENA 4, 68191 Rinse, 14b. Visual Programming of CUP Size, Water Care

Page 21

1.Push and hold the P button (Fig. 4) until the display shows

RINSE.

2.Turn the Rotary Dial until the display shows PRODUCT.

3.Push the Rotary Dial. The display shows WATER.

4.Push the Rotary Dial again. The display shows 5.0 OZ.

5.Turn the Rotary Dial until the display shows 3.0 OZ.

6.Push the Rotary Dial to confirm. The display shows OK and then WATER. You have now set the coffee volume for 1 CUP to 3 oz. Note: when using the 2-cup setting the ENA will now produce a total of 6 oz.

7.Turn the Rotary Dial to FLAVOUR and push the Rotary Dial. The display shows NORMAL.

8.Turn the Rotary Dial until the display shows STRONG and push the Rotary Dial to confirm. The display shows OK and then FLAVOUR.

9.Turn the Rotary Dial until the display shows TEMP.

10.Push the Rotary Dial. The display shows HIGH.

11.Turn the Rotary Dial until the display shows NORMAL and push to confirm. The display shows OK and then TEMP. You have now re-programmed all three settings.

12.Push the P button to return to READY.

14b. VISUAL PROGRAMMING OF CUP SIZE

You can also reprogram the cup size visually. READY.

•Place the cup underneath the coffee spout.

•Press and hold down the Rotary Dial until the display reads ENOUGH COFFEE? Then let go. The ENA starts grinding and brewing coffee.

•When the desired amount of coffee is in your cup push the Rotary Dial again. The display shows OK and then READY.

This is now the new programmed volume for the one cup size.

15. WATER CARE

Water is heated inside the machine, this leads to calcium deposits forming. The ENA works with:

• regular tap water • bottled water • distilled water.

We recommend using regular tap water or bottled water. Distilled water has no minerals and does not improve the taste of coffee. Tap water has a varying degree of water hardness (chapter 16).

Most bottled water has a low level of water hardness. IMPORTANT: do not use carbonated water or any other liquid in the water tank.

You have the following options to take care of the water.

•Decalcifying System (chapter 18.3).

•Clearyl Water Filter Cartridge (chapter 17.1).

Your machine is pre-set in the factory to automatically remind you to decalcify. You can change the water hardness setting to comply with the water you are using (chapter 16.1).

Please note: The machine will automatically remind you when it is necessary to run certain water maintenance programs. It is important that you follow those instructions. Otherwise your machine may not function properly.

16. WATER HARDNESS MONITOR

Your ENA is set to a water hardness of 10ºdH. The ENA will remind you when it is time to perform a decalcifying cycle. You can change the water hardness setting from 1 to 30dH. If you are not sure about the hardness of your water, ask your local water company for the "Water Hardness in Grains." The machine displays the water hardness in the German hardness scale which is a bit different from the American "Grain" scale (see chart below). You can also use the enclosed water hardness indicator

21.

Page 20 Page 22
Image 21
Page 20 Page 22
Contents ENA Important Safeguards Jura-Capresso Customer ServiceAccessories ENA Dual Frother Plus Milk Table of Contents Clearyl Water Filter Cartridge Installing and activating the Clearyl filterWelcome to ENA BEAN-TO-CUP / Crema Coffee High Pressure Brewing PLEASE, DON’T... or you void your warranty protectionDifferent Coffee Drinks Coffee FactsPLEASE, do Factory SettingsFilling the Water Tank Turning the Machine onAbout Coffee Beans Filling the Bean Container7a. Coffee Strength Flavor Adjusting the GrinderDaily Preparation Grinding and Brewing Coffee Beverages9b. Brewing ONE CUP Using PRE-GROUND Coffee9c. Brewing TWO Cups The display shows Ready 9d. Overriding CUP Size and Coffee StrengthGround Using HOT WaterCappuccino and Latte Recommendation12b. Cleaning the Dual Frother Plus 12a. Using the Dual Frother PlusFast cleaning Tips for frothing CappuccinoThorough cleaning of the Dual Frother parts Using the Frothxpress System ENA 5 standard equipment13a. Making Cappuccino and Latte Making one Cappuccino 13b. Hotter Milk with Frothxpress 13d. Rinsing and Cleaning the Frothxpress13c. Making HOT Chocolate and Cafe Mocha RinsingFilter ProductHardness Energy14b. Visual Programming of CUP Size RinseWater Care Water Hardness MonitorChanging the Water Hardness Monitor Ready Clearyl Water Filter CartridgeClearyl cartridge HEATING. Ready Automatic Cleaning Cycles 18.1 Cleaning with Special Tablet Manual Clearyl ReplacementClean / Ready Do not LET the Clearyl Filter DRY OUTEmpty Tray Manual Tablet Cleaning CycleDecalcifying DE-SCALE /READYRinse CYCLE, Manually Manual DecalcifyingChanging the AUTO-OFF Setting Energy Saving ModeChanging the AUTO-OFF setting e.g. from 2 HRS to 4 HRS Changing from OZ to ML UnitClose TAP Tray Missing CleanFill Beans Fill Water TankError Messages Error Grinder Makes AN Extremely Loud Noise no Beans are GroundSupplies Other limitations and exclusions This Warranty does not CoverJura-Capresso, LLC
Top Page Image Contents