Turbo Chef Technologies 2TM manual Ordering a Smart Card, Loading a Menu from a Smart Card

Page 26

18 O P E R A T I N G T H E O V E N

Ordering a Smart Card

To order a smart card, call 1-800-90TURBO,

+1 214-379-6000, or your Authorized Distributor.

Loading a Menu from a Smart Card

CAUTION: Loading a menu from a smart card will overwrite all existing recipes programmed into the oven.

To load a menu from a smart card:

1.Ensure the oven is cooling down or off.

2.Insert the smart card into the smart card reader. Orient the card as shown in Figure 21.

3.Press the bottom-left soft key.

4.Press the middle-left soft key to “Load Menu from Card” (Figure 22).

5.Press enter to confirm or back/stop to cancel.

After approximately 5 seconds, the oven will display

aconfirmation message and return to the cooling down or off screen.

Saving a Menu to a Smart Card

CAUTION: Saving a menu to a smart card will overwrite all existing settings on the smart card.

To save a menu to a smart card:

1.Ensure the oven is cooling down or off.

2.Verify the write card function is enabled (for instructions, see page 14).

3.Insert the smart card into the smart card reader Orient the card as shown in Figure 21.

4.Press the bottom-left soft key.

5.Press the top-left soft key to “Save Menu to Card” (Figure 23).

6.Press enter to confirm or back/stop to cancel.

Checking the Recipe Counter

Refer to Figure 24. To view how many times each recipe (food item) has been cooked:

1.Ensure the oven is cooling down or off.

2.Press and hold the middle-left or middle-right soft key for 3 seconds.

3.The screen will display food items in the first food group. To view other food groups, use the up and down keys.

4.Press the back/stop to exit.

NOTE: To erase counters, press enter when viewing the totals.

figure 21: Inserting Smart Card into Reader

Image 26

Contents For the turbochef high h batch 2TM rapid cook oven Page For service or information Page Table of Contents Operating the Oven General Safety Information Reducing Fire RiskGrounding Instructions Power Cord ReplacementPreventing Oven Damage Specifications and Installation CertificationsElectrical Specifications ConstructionDamaged Shipment Claims InstallationPackaging Lifting and Placing the OvenStacked HHB 2 Ovens Two Configurations Double Stacking OvensBuilt-In Installation Installation Near Open Heat SourceVentilation Requirements Optional Installation ItemsSetup Oven Restraint Kit P/N TC3-0242 KITRemoving Jetplates 24 610 mm Oven Cart with OvensOven Maintenance Remove the Bottom Jetplate Deep CleaningClean the Oven Door Remove the Grease Filter and BracketClean the Cooling Fan Housing Clean the Cook ChamberReinstall all Clean Parts Dry the Cook ChamberOperating the Oven User ControlsTime Screen CookingAdditional Cooking Options Done ScreenDone Enabling/Disabling the Edit Menu Erasing Oven SettingsOptions Menu Enabling/Disabling Done Screen Demonstration ModeEnabling/Disabling the Time Screen Modifying Recipes Adjusting the Cook Cavity TemperatureProgramming Recipes Modifying Recipes Step Saving a Menu to a Smart Card Ordering a Smart CardLoading a Menu from a Smart Card Checking the Recipe CounterLoading from Smart Card Checking the Fault Log Troubleshooting TipsRecording Error Messages Common Issues and SolutionsS U E North America Limited Warranty TurboChef High h Batch Oven North AmericaWarranty Service Exclusive Remedy Warranty Parts Return Disclaimer of DamagesTurboChef High h Batch 2 Oven International International Limited WarrantyLimited Warranty N T E R N a T I O N a L L I M I T E D W a R R a N T Y Warranty Parts Return +1 214-379-6000 or Your Authorized Distributor