7.Install the Door Bracket to the inside of front Cart Legs. Align the threaded holes on the Door Bracket with the holes on Cart Legs. Tighten securely by using 4 of the 1/4"x2" Pattern Head Screws provided. (See Fig. 3. on page 11)
Upper door bolt holes (at ends of bracket) must face outward.
Installing The Cabinet Doors
For LPG Gas grills:
1.Install the Door Stops to the Bottom Shelf and the Door Bracket. See Fig. 4a.
2.Align the holes on the Door Stops with the threaded holes on the top of the Bottom Shelf and bottom side of Door Bracket. Tighten securely by using 4 of the 1/4"xl/2" Pattern Head Screws provided. See Fig.4a.
3.Remove the white protective film from the stainless steel Doors. Attach a Door Handle to
each Front Door by using 2 of the M4x5mm Pattern Head Screws provided. See Fig. 4b. Be careful not to scratch the Door surfaces.
4.When installing the Front Doors, make sure the door bolt holes are located on the hinge sides of the Cart Legs.
5.Install either Front Door by inserting 1/4"x5/8"
6.Repeat these steps to install the other Front Door.
7.Install the Cart Spice Basket to the inside of Left Door. Align the threaded holes on the inside of Left Door with the holes on the Cart Spice Basket. Tighten securely by using 2 of the 1/4"xl/2" Pattern Head Screws provided. See Fig.4b.
Figure 4a (LP gas model only)
BRACKET
Found in
Hardware Pack
SHELF
TANK
TRAY KiT
Figure 4b (LP gas model only)
DOOR
UPPER DOORBRACKET
BOLT HOLE
FRONT DOOR
,LEFT
DOOR_
HANDLE
| LOWER DOOR |
| BOLT HOLE |
CART SPICE | BOTTOM |
| |
BASKET | SHELF |
|
FRONT DOOR
,RIGHT
14