Kenmore 790.7936 Setting Oven Controls, Setting the Clock, To set the clock example below for

Page 17

Setting Oven Controls

•Setting the Clock

•Changing between 12 or24 hour display

Setting the Clock

The CLOCK _

pad is used to set the clock. The clock may be

set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation. When the range is first plugged in, or when the power supply to the range has been interrupted, the timer in the display will flash with power failure "PF" (See Fig. 1).

INSTRUCTIONS

To set the clock (example below for 1:30):

1. Press	_.	"CLO" will	appear	in the display		(Fig.	2).
.	(_(_(_		pads	to set the	time	of day	to 1_30
Press
(Fig. 3). "CLO"		will appear	in the display.		Press	(_.	"CLO"

will disappear and the clock will start (Fig. 4).

Fig. 1

PRESSDISPLAY

G

Fig. 2

Fig. 3

Changing between 12 or 24 hour time of day display:

1. Press and hold _

for 6 seconds (Fig. 3). While holding the

_for

6 seconds

pad down the current time of day will remain and "CLO" will disappear from the display (Fig. 4). CONTINUE holding the pad until "12 Hr"(Fig. 5) or "24 Hr" appears in the display.

2.Press @ to switch between the 12 and 24 hour time of day

display. The display will show either "12 Hr" (Fig. 5) or "24 Hr" (Fig. 6).

3. Press _

to accept the desired change or press _

to

reject the change.

4.Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from O:OOthrough 23:59 hours.

Fig. 4

Fig. 5

Fig. 6

17

Image 17

Contents Estufa a gas Contents Important Safety Instructions Important Instructions for Cleaning Your Range Important Instructions for UsingFor CERAMIC-GLASS Cook TOP Models some models Important Safety NoticeGrounding Instructions Conversion to Liquefied Petroleum Gas or L.P. GasMaintenance Agreements Sears Installation ServiceSears Maintenance Agreement U.S.A9k!iiN t ,3 Before Using Your RangeYour Elite Gas Range Features Include Range FeaturesOven Vent Location Before Setting Oven ControlsRemoving & Replacing Oven Racks Types of Oven RacksBaking Layer Cakes with 1 or 2 Oven Racks Before Setting Surface ControlsAir Circulation in the Oven Control Locations of the Gas Surface BurnersSurface Cooking Setting Proper Surface Burner Flame SizeOperating the Gas Surface Burners Size Type of CookingOperating the Bridge Burner for Bridge Burner models only Fig2Using the Griddle Setting Warmer Drawer ControlsUsing the Warmer Drawer Care & Seasoning of the GriddleTo Set the Warmer Drawer & Bread Proofing Controls Warmer Drawer Recommended Food Settings Table Food ItemPreparing Bread Dough for the Warmer Drawer Warmer Drawer RemovalTo Remove and Replace Warmer Warm & Ready TM Drawer To Remove Warmer DrawerMinimum & Maximum Electronic Oven Control Pad FeaturesControl Pad Settings Setting the Clock Setting Oven ControlsTo set the clock example below for PressdisplaySetting Setting Continuous Bake or 12 Hour Energy SavingTo set the Kitchen Timer example for 5 minutes To cancel the Kitchen Timer before the set time has run outTo activate the Oven Lockout feature Setting Oven Lockout FeatureSetting Temperature Display m Fahrenheit or Celsius To reactivate normal oven operationFor 7seconds Setting Silent Control OperationSaving and Recalling Recipe Settings To set the Preheat temperature for 350F Setting PreheatInstructions Setting BakeTo set the Bake Temperature to 350F Bake finishes Setting Timed BakeWhen the set bake time runs out Setting Delay StartTo program the oven for a Delay Start Delayed Timed Broiling To set the oven to broil at the default setting 550FSearing Grill RecommendedMeats Setting Food Categories FeaturesCakes Breads @ PadsTo set the oven for Convection Bake Temperature to 350F Setting Convection BakeCakes have better results when baked using the Cakes Pad Tips for Convection BakeTo Set Add 1 Minute Feature To set the Convection Convert featureOptional @ Setting the Slow Cook FeatureSetting the Sabbath Day Feature To set Warm & Hold Setting the Warm & Hold TM FeaturePRESS,,2 To set Warm & Hold to turn on automaticallyAdhere to the following cleaning precautions Self-CleaningSelf-Cleaning Oven 200 to 400 using Number pads Clean will flash, 300 hours PressStopping or Interrupting a Self-Cleaning cycle When the Self-Clean cycle is doneTo adjust the oven temperature higher Adjusting Oven TemperatureTo adjust the oven temperature lower Press DisplayHow to Clean General Care & CleaningSurfaces Glass control panelDoor Care Instructions Care & Cleaning of Stainless Steel some modelsRemoving & Replacing the Lift-Off Oven Door Cleaning the Cooktop, Burner Heads, Caps & Grates Plastic or foods with a high sugar content Cleaning Recommendations for the Ceramic Glass CooktopFor models with a Ceramic Glass Cooktop only For light to moderate soilTo replace the oven light bulbs Changing Oven LightsBefore You Call Self-Cleaning section Possible CAUSE/SOLUTIONOccurrence ScratchesorabrasionsoncooktopsurfaceSlow Cook Turkey Breast Recipes for Slow CookOur Home MY-HOMECanada Call anytime, day or night U.S.A. and Canada