Kenmore 665.16819, 665.15812 manual Water Heat, No Heat Dry, Delay Hours, Control Lock On, Sensing

Water Heat

Select this option to heat the water to 140°F (60°C) during parts of the cycle. (See the Cycle Chart.) Heating the water helps improve washing results. This option adds both heat and wash time to parts of the cycle.

NOTE: Pots Pans automatically uses this option. Water Heat is an option with the Normal Wash and Water Miser cycles.

No Heat Dry

Select this energy-saving option to dry without heat. No Heat drying is useful when loads contain plastic

dinnerware that may be sensitive to high temperatures.

The dishes take longer to dry and some spotting can

occur.For best drying, use a liquid rinse aid. Some items (such as plastics) may need towel drying.

NOTE: Quick Wash and Quick Rinse automatically use this option. No Heat Dry is an option with all other cycles.

Delay Hours

Select this option to run your dishwasher at a later time or during off-peak hours.

To delay the start

1.Close the door.

2.Select a wash cycle and options.

3.Press DELAY HOURS 1 time for a 2-hour delay, 2 times for a 4-hour delay, or 3 times for a 6-hour delay.

HOURS 2 4 6

Iell

@

The number glows above Delay Hours. The dishwasher starts the cycle in the selected number of hours.

4.Press START.

NOTE: To cancel the delay, press CANCEL/DRAIN until all Delay Hours lights are off.

IMPORTANT:

Operate your dishwasher only when you are at home.

If your home is equipped with a water softener, do not

start the dishwasher during the regeneration of the softener.

Control Lock On

Use the Lock to prevent your dishwasher from accidentally being turned on. Use the Lock, also, to prevent accidental

cycle or option changes during a cycle.

LOCKON

When LOCK ON is lit, all buttons are disabled.

NOTES:

•The dishwasher door can be opened while the controls are locked.

•You can turn on the Lock while the dishwasher is running.

To turn on the Lock

Press and hold

Follow the progress of your dishwasher with the Cycle Status Indicators. CLEAN glows when a cycle is finished.

The light turns off when you open the door or press Cancel/Drain.

O	O	ODO	Oil	II	Q
SENSING	WATER HEATING	WASHING	RINSE	DRY	CLEAN

Sensing

Your dishwasher senses the soil level on the dishes. Soil

level determines the length of some cycles, the amount of heat added to the wash or rinse, and the cycle needed for the load. SENSING glows during the soil sensing parts of the cycle. Wash action continues while sensing occurs.

for 4 seconds. LOCK ON glows.

If you press any pad while your dishwasher is locked, the light flashes 3 times.

To turn off the Lock

Press and hold NO HEAT DRY for 4 seconds. The light turns off.

16