Makita G1200R instruction manual Checking the area around the generator

Page 11

Checking the area around the generator

-Area should be free of inflammables and hazardous materials.

-The generator is placed at least 1meter (3 ft) away from buildings or other facilities.

-Generator is located in well-ventilated, open area.

-The exhaust pipe is pointed toward a well-ventilated open area.

-The generator is positioned away from any type of open flame or sparks.

-The generator is placed in a stable condition on a level surface, not on an inclined or uneven surface.

-The generator is not enclosed or blocked by obstacles such as pieces of wood, cardboard, etc.

0 Be sure to disconnect the appliance from the generator before starting. It is very dangerous to start the engine with the appliance on since the appliance may start suddenly.

Check to make sure that the switch of the appliance is turned off or its plug is discon- nected from the receptacle.

- 8 -

Image 11
Contents Model GI Z O O R Page Foreword Table of ContentsPrevention of electrical shock Safety PrecautionsFire prevention8 Necessary inspections and checks Exhaust gas precautionsOther safety instructions Component Identification Fuel DC receptacle Controls and IndicatorsFuel Cock VoltmeterGround Earth Terminal Frequency adjusting screwAC circuit breaker DC circuit breaker Starter handleChecking fuel level Checking engine oil levelChecking the area around the generator Starting Operating ProceduresAC application DC application For charging 12V battery only Stopping generator Easy maintenance Periodic MaintenancePeriodic maintenance Do-it-yourself serviceEngine oil change Easy Checking and MaintenanceAir cleaner servicing Cleaning procedureChecking the spark plug Spark arrester cleaningCleaning fuel strainer Preparation for Storage When no electricity is generated at receptacle TroubleshootingWhen engine fails to start IO.APPLICABLE Wattage of the Generator Heating Resistance Power factor 1.O, No starting currentTable below shows the values for a 1OOm wire US Gal SpecificationsWiring Diagram Makita Corporation