Safety Warnings Double Insulation | Craftsman 900.74547, C935.51850

of moving parts, binding of moving parts, breakage of parts, mounting, and any other condition that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless otherwise indicated elsewhere in this manual.

WARNING: When servicing double insulated tools, USE ONLY IDENTICAL REPLACEMENT PARTS. Replace or repair damaged cords.

WARNING: To prevent electrical shock hazard, use only with an extension cord suitable for outdoor use. Always connect extension cords to a fused line or one protected by a circuit breaker. WARNING: To reduce the risk of electric shock use only with an extension cord intended for outdoor use, such as SW-A, S0W-A, STW-A, STOW-A, SJW-A, SJOW-A, SJTW-A or SJTOW-A.

•EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord be sure it is heavy enough to carry the current your product will draw. An undersized extension cord will cause a drop in line voltage resulting in loss of power and

overheating. The following table shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord.

Minimum Gage for Extension Cords (AWG) 120

VAC Tools


Total Cord Length		0-25	26-50	51-100	105-150
	Amp Rating	AWG	AWG	AWG	AWG
	More than 0	18	16	16	14
	Not More than 6
	More than 6	18	16	14	12
Not More than 10
	More than 10	16	16	14	12
Not more than 12
	More than 12	14	12	Not
Not more than 16				Recommended

ADDITIONAL WARNINGS FOR STRING TRIMMERS

1.DO NOT immerse tool in water or squirt it with a hose. DO NOT allow any liquid to get inside it.

2.Do not store the tool on or adjacent to fertilizers or chemicals.

3.DO NOT clean with a pressure washer.

SAFETY WARNINGS: DOUBLE INSULATION

	Double insulated tools are constructed	NOTE: Double insulation does not take
	throughout with two separate layers of	the place of normal safety precautions
	electrical insulation or one double	when operating this tool. The insulation
	thickness of insulation between you and	system is for added protection against
	the tool’s electrical system. Tools built	injury resulting from a possible electrical
	with this insulation system are not	insulation failure within the tool.
	intended to be grounded. As a result,	Replacement parts: When servicing all
	your tool is equipped with a two prong	Replacement parts: When servicing all
	your tool is equipped with a two prong	tools, USE IDENTICAL REPLACEMENT
	plug which permits you to use extension	tools, USE IDENTICAL REPLACEMENT
	plug which permits you to use extension	PARTS. Repair or replace damaged
	cords without concern for maintaining a	PARTS. Repair or replace damaged
	cords without concern for maintaining a	cords.
	ground connection.	cords.
	ground connection.

SAFETY WARNINGS AND INSTRUCTIONS: POLARIZED

PLUGS

To reduce the risk of electric shock, this	plug does not fit fully into the extension
equipment has a polarized plug (one	cord, reverse the plug. If it still does not
blade is wider than the other). This	fit, obtain a suitable extension cord. If the
equipment must be used with a suitable	extension cord does not fit fully into the
polarized 2 wire or 3 wire extension cord.	outlet, contact a qualified electrician to
Polarized connections will fit together	install the proper outlet. Do not change
only one way. Make sure that the	the tool plug or extension cord in any
receptacle end of the extension cord has	way.
large and small blade slot widths. If the

C935.51850, 900.74547 specifications

The Craftsman 900.74547 and C935.51850 are two versatile tools that combine efficiency and innovation, perfect for DIY enthusiasts and professional craftsmen alike. These models exemplify the Craftsman commitment to quality, offering a blend of power, durability, and user-friendly features.

The Craftsman 900.74547 is a high-performance tool with a robust design, featuring a powerful motor that ensures consistent performance across various applications. One of its standout characteristics is the variable speed control, allowing users to adjust the speed according to the task at hand, whether it's cutting, sanding, or drilling. This flexibility makes it suitable for a wide range of projects, from intricate woodworking to heavy-duty construction tasks.

On the other hand, the C935.51850 is designed with advanced technology that enhances precision and ease of use. This model comes equipped with an ergonomic grip, ensuring comfort during extended use. It also features a built-in LED light that illuminates the work area, making it ideal for low-light conditions. The tool's construction is sturdy, designed to withstand the rigors of professional use while remaining lightweight enough for easy handling.

Both models boast a quick-release chuck system, enabling users to change bits swiftly without the need for additional tools. This feature significantly reduces downtime during tasks, allowing for seamless transitions between different applications. Furthermore, they are compatible with a wide range of accessories, providing added versatility for various jobs.

In terms of safety, the Craftsman 900.74547 and C935.51850 come with integrated safety features, including a lock-off switch that prevents accidental starts. This attention to safety is crucial for ensuring user confidence, especially in high-pressure environments.

In conclusion, both the Craftsman 900.74547 and C935.51850 are exemplary tools that showcase innovation and practicality. With their powerful motors, variable speed controls, ergonomic designs, and safety features, they represent a reliable choice for anyone looking to tackle a variety of projects, whether at home or in a professional setting. Selecting either of these models ensures that users have a dependable ally at their side, ready to deliver exceptional results every time.