McCulloch MS1015P user manual Chain Maintenance Instructions, Entretien DE LA Chaine

Page 38

BAR GROOVES - Bar grooves (or rails which support and carry the chain) should be cleaned if the saw has been heavily used or if the saw chain appears dirty. Rails should always be cleaned every time the saw chain is removed. OIL PASSAGES - Oil passages at bar pad should be cleaned to ensure proper lubrication of the bar and chain dur- ing operation. This can be done using a soft wire small enough to insert into the oil discharge hole.

E

To Clean Guide Bar Rails:

N

1.

Remove sprocket cover, bar and chain (see Section 3-4).

2.

Using a screwdriver, putty knife, wire brush or other similar instrument, clear residue from the rails on the guide

G

 

bar.

 

 

LThis will keep the oil passages open to provide proper lubrication to the bar and chain (Figure 6-1B). I 3. Reinstall the bar, chain and bar bolt retaining nuts. (See Section 3-4).

S6-2. CHAIN MAINTENANCE INSTRUCTIONS

HWARNING

Unless you have experience and specialized training for dealing with kickback (see Safety Precautions), always use a low-kickback saw chain, which significantly reduces the danger of kickback. Low-kickback saw chain does not com- pletely eliminate kickback. A low-kickback or “safety chain”, should never be regarded as total protection against injury.

RAINURES DU GUIDE-CHAINE - Les rainures du guide-chaîne (ou les «gorges» qui soutiennent et portent la chaîne) doivant être nettoyées si la chaîne a été fortement utilisée ou si elle parait sale. Les rainures doivent être nettoyées à chaque retrait de chaîne.’

F

Nettoyage des rainures du guide-chaîne :

R

1.

Enlever le couvercle du pignon, le guide-chaîne et la chaîne (voir Section 3-4).

2.

A l’aide d’un tournevis, d’une spatule, d’une brosse en fil de fer ou autre outil similaire, enlever tout résidu des

Arainures du guide-chaîne de la tronçonneuse. Les passages d’huile seront ainsi dégagés et fourniront une lubri-

N fication adéquate à la chaîne et au guide-chaîne (Figure 6-1B).

C3. Replacer le guide-chaîne, la chaîne et les écrous du guide-chaîne. (Voir Section 3-4.)

A6-2. ENTRETIEN DE LA CHAINE

I

S AVERTISSEMENT

A moins d’avoir reçu une formation spéciale et d’être expériencé en ce qui concerne les rebonds (Voir les Mesures de Sécurité), utiliser toujours un chaîne de sécurité qui réduit de manière significative les dangers de rebonds. Une chaîne de sécurité ne peut en aucune manière éliminer totalement les risques de rebonds. Une chaîne à «rebonds réduits» ou chaîne de sécurité ne doit jamais être considérée comme protection totale contre des blessures potentielles.

RANURAS DE LA BARRA - Las ranuras de la barra (o rieles que soportan y conducen la cadena) deberán ser limpia- dos si la sierra ha sido utilizado para servicio pesado o si la sierra manifiesta suciedad. Los rieles deben de ser limpiados cada vez que la cadena de la sierra es removida.

PASAJES DE ACEITE - Los pasajes de aceite en la base de la sierra deben de ser limpiados, para asegurar una lubricación propia de la barra y cadena durante la operación. Esto puede ser realizado usando un alambre blando lo suficientemente pequeño para insertarlo dentro del agujero de descarga de aceite.

EPara Limpiar los Rieles de la Barra:

S1. Remueva la cubierta del piñón, la barra y cadena (vea la Sección 3-4).

P2. Utilizando un desarmador, navaja, cepillo de alambre o cualquier otro instrumento similar, limpie residous de los

A

rieles de la barra guía. Esto mantendrá los pasajes abiertos para proveer una lubricación adecuada a la barra y

Ñ

cadena (Figura 6-1B).

3. Reinstale la barra, cadena y las tuercas retenedoras de la barra. (Vea la Sección 3-4.)

O

 

L6-2. INSTRUCCIONES DE MANTENIMIENTO DE LA CADENA

PRECAUCION

A menos de que usted tenga experiencia y entrenamiento especializado para tratar con el contragolpe (vea las Precaucions de Seguridad), siempre utlice una cadena para sierra de contragolpe bajo, la cual reduce significativa- mente el peligro de un contragolpe. Una cadena de contragolpe bajo o “cadena de precaucion” nunca deberá ser referida como protección total contra una lesión.

37

Image 38
Contents Models / Modéles / Modelos POR Favor LEA Please ReadLire Attentivement General Information Generalites Informacion General Page Safety Features Rouge Avertissement Vert RecommandeSafety Precautions for Chain SAW Users RecommendedAdvertencia Avertissement RecommandeAI Avertissement RecommendacionAAB Beware Cuidese DEInstructions DE Securite Importantes Avertissement Important Safety Instructions WarningRead ALL Instructions Lire Toutes LES InstructionsPage Page Guard Against Kickback Page Page Pole SAW Trimming Precautions Coupe sans forcer dans le bois Conserver CES Instructions Guarde Estas InstruccionesIntroduction UnpackingGuide BAR / SAW Chain Replacement Installation Barra Guia / Cadena Instalacion DE RemplazoPrecaucion GL CautionAN Attention Page Page Cortando CON LA Motosierra Telescopica Cutting with the Pole SAWCoupe a L’AIDE DE LA Perche Elagueuse Remplissage DU Reservoir a Huile Filling OIL TankSelecting the Proper Extension Cord for Your SAW Model Choix D’UN Prolongateur Electrique ApproprieTo Start SAW HS WarningOL Advertencia Demarrage DE LA Perche ElagueuseArret DU Moteur To Stop MotorChain and BAR Lubrication Para Apagar EL MotorExtension Cords Aavertissement / AttentionnAdvertencia / Precaucion Prolongateurs ElectriquesPage Double Insulation No Serviceable Parts Inside Double Isolation Aucune Piece Interne ReparableTailler UN Arbre Elaguar AdvertissementTrimming a Tree Pruning Podando UN ArbolRA Avertissement Abattage D’UN ArbreGeneral Guidelines for Felling Trees Regles Generales a Observer Pour L’ABATTAGECorte DE Talado Limbing EbranchageLeñado BuckingTronconnage Tronconnage SUR Chevalet Bucking Using a SawhorseHS Caution Leñado Usando UN Caballete Para AserrarPage Instrucciones DE Mantenimiento DE LA Cadena Chain Maintenance InstructionsEntretien DE LA Chaine What is a Low-Kickback Saw Chain? Page Mantenimiento Preventivo Preventative MaintenanceEntretien Preventif Servicing a Double Insulated ApplianceDescription Part Number Page Stop

MS1015P specifications

The McCulloch MS1015P is a versatile and user-friendly chainsaw designed for both novice and experienced users alike. Renowned for its robust performance, the MS1015P offers an outstanding blend of power, efficiency, and advanced technology, making it an ideal tool for a variety of cutting tasks, from trimming branches to felling small trees.

One of the standout features of the MS1015P is its powerful 1.0 kW engine, which delivers enough power to tackle tough jobs while maintaining a lightweight design for easy maneuverability. The engine is designed to provide quick starts, thanks to its reliable recoil start system, ensuring that users can get to work without unnecessary delays.

The MS1015P is equipped with a 30 cm (12 inch) guide bar, which strikes a perfect balance between cutting capacity and ease of use. This size makes it suitable for both agricultural and domestic tasks, allowing users to perform detailed pruning as well as handle larger cutting jobs with ease. The accompanying chain is designed to deliver smooth cuts, reducing kickback and vibrations, which significantly enhances user comfort and safety during operation.

Another critical aspect of the MS1015P is its efficient clean technology. It boasts low emissions and reduced fuel consumption, making it an environmentally friendly option for those who are conscious about their ecological footprint. This technology not only helps in minimizing environmental impact but also allows for longer periods of use between refueling.

Ease of maintenance is also heavily considered in the design of the MS1015P. The automatic chain lubrication system ensures that the chain is continuously lubricated during use, reducing wear and prolonging the lifespan of both the chain and the guide bar. This feature minimizes the need for frequent adjustments and downtime, allowing users to focus on their cutting tasks.

Safety features are paramount in the design of the MS1015P. The chainsaw includes a chain brake for quick stopping in case of kickback and an adjustable vibration dampening system that enhances user comfort by reducing fatigue during extended use. The lightweight construction, combined with these safety features, makes the MS1015P a reliable choice for anyone seeking a dependable chainsaw for various applications.

In conclusion, the McCulloch MS1015P stands out in the chainsaw market due to its combination of power, efficiency, user-friendliness, and safety. Whether for home gardening or more demanding forestry tasks, this chainsaw offers all the necessary features to get the job done effectively.