Wayne-Dalton 8850 installation instructions Attaching Torsion Springs to Center Bearing Bracket

16	Attaching Torsion Springs to
	Center Bearing Bracket
Tools Needed:	Align the stationary spring cone(s) with			Torsion
	the holes in the center bearing bracket.
				Spring
	Secure the spring(s) to the center bearing
9/16” Socket
	bracket with (2) 3/8”- 16 x 1-1/2” hex			Stationary
Ratchet Wrench	head bolts and (2) 3/8”- 16 nuts.	5/16” x 1- 5/8” lag screws		Spring cone
	IMPORTANT: Springs under tension
9/16” Wrench	can be dangerous.
	IMPORTANT: The spring warning	Center bearing
	tag(s) supplied must be securely
		bracket
	attached to the stationary spring
	cone in plain view. Should a
	replacement spring warning tag be
	required, contact Wayne-Dalton
	Corp. for free replacements.	Stationary
		Spring cone
		Torsion		INSTALLATION
		Spring
			Center bearing
		Header	bracket
		(2) 3/8” x 1-1/2”		(2) 3/8” Nuts
				and Washers
		hex head bolts
		Torsion
		Spring
				17

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com