Wayne-Dalton 8850 installation instructions Package Contents, Door Section Identification

Package Contents Continued...

3/8”- 16 Hex Nuts	(2) 1/4”- 20 HEX	5/16”- 18 Hex nuts	1/4”- 20 Flange Hex	(2) 3/16” roller	(2) 5/16”	(2) Cotter	(2) Clevis
(as required)	NUTs	(as required)	Nuts (as required)	Spacers	Washers	pins	pins

1/4”- 20 x 9/16” Track	(2) 5/16” - 18 x 3/4”	1/4”- 20 x 7/8” self drilling	5/16” X 1 5/8” Hex head lag
bolts (as required)	Carriage Bolts	Screws (as required)	screws (as required)
	(AS REQUIRED)

3/8”- 16 x 1-1/2” hex head bolts	5/16” x 1 5/8” tamper resistant	1/4”- 20 x 5/8”	(2) 3/8” - 16 x 3/4”	1/4- 20 x 5/8” Self
		Carriage Bolts
(as required)	Lag Screw (as required)		Truss head bolts
		(as required)		drilling screws

5/16” X 1” self drilling	5/16” x 2” tamper resistant Lag Screws	5/16” X 2” HEX head LAG screws
screws (as required)
	(as required)	(as required)

	Door Section Identification
Tools Needed:	The Top section is always the 4th
	section on four section door and the 5th
	section on five section door.
	The intermediate i section having
	warning labels on either the right or left
	hand side of endstile on the section.
	This section is always the 3rd section
	from the bottom of the door.
	The lock section can be identified
	by having no warning labels and a
	ribbed fin on the top part of the section.
	This section is always the 2nd section
	from the bottom of the door.
	The bottom section can be
	identified by the factory attached
	bottom astragal, or by the bottom
	bracket warning labels on each end
	stile. This section is always the 1st
	section on four and five section doors.

Top Section

warning label

Intermediate i Section

Lock Section

Bottom Bracket

warning Labels

astragal Bottom Section

4

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com