�Exhaust Port Installation
Tools Needed: | Exhaust port is installed on the back side of | |
the bottom section into the aluminum panel | ||
| ||
| or a double wide bottom rail. | |
| NOTE: Gaskets need to be installed against | |
| both sides of the door section. | |
| Install the exhaust port using (3) #10 x | |
| counter sunk bolts and nuts, as shown. | |
| NOTE: After completing this step, continue | |
| with step 9 on page 13. |
aluminum panel
Exhaust Port
Gasket
(3)#10 x
double wide bottom rail
Outside Trim Ring
(3) #10 Hex
Nuts
Gasket
24
Please Do Not Return This Product To The Store. Contact your local
local yellow pages/business listings or go to the Find a Dealer section online at