Woods Equipment BW180XHDQ, BW126XHDQ manual Safety

SAFETY & INSTRUCTIONAL DECALS

ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!

Replace Immediately If Damaged!

12 - PN 1004991

	WARNING	AND CYLINDER
		TRANSPORT LOCK
		REQUIREMENTS
	RAISED CUTTER CAN DROP AND CRUSH
Cutt	ers must be equipped with transport lock.	SINGLE-ACTING FULL
		EXTENSION

stands.

All transport components must be functional, kept in good

Blocking up prevents cutter dropping from hydraulic leak down, hydraulic system failures, or mechanical component failures.

				FAILURE TO FOLLOW INSTRUCTIONS CAN		TRANSPORT
		1004991		RESULT IN SERIOUS INJURY OR DEATH.		LOCK
10 - PN 33347			13 - PN 1003751			14 - PN 18877
￿￿￿￿		￿￿		WARNING		WARNING
						TO AVOID SERIOUS
						INJURY OR DEATH:
			CRUSHING AND PINCHING HAZARD			Read Operator's Manual (available
￿￿	￿￿￿￿￿￿					from dealer) and follow all safety
			Be extremely careful handling various parts of
						precautions.
			the machine. They are heavy and hands, fingers,
						Keep all shields in place and in good
			feet, and other body parts could be crushed or
						condition.
			pinched between tractor and implement.
			Operate tractor controls from tractor seat only.			Operate mower from tractor seat only.
						Lower mower, stop engine and remove
			Do not stand between tractor and implement
						key before dismounting tractor.
			when tractor is in gear.			Allow no children or untrained persons
			Make sure parking brake is engaged before
						to operate equipment.
			going between tractor and implement.			Do not transport towed or
￿￿￿￿￿￿￿￿￿￿￿￿￿			Stand clear of machine while in operation or			semi-mounted units over 20 mph.
	￿￿￿￿￿￿33347E		when it is being raised or lowered.			FAILURE TO OPERATE SAFELY
				FAILURE TO FOLLOW THESE
						CAN RESULT IN
			INSTRUCTIONS COULD RESULT IN
						INJURY OR DEATH.
				SERIOUS INJURY OR DEATH.
					1003751-A	18877-C
15 - PN 18964					16 - PN 15502
				WARNING		WARNING
			RAISED WING EXPOSES BLADE AND			ROTATING COMPONENTS
			INCREASES￿	THROWN OBJECT HAZARDS.
			Only raise for transport. Stop cutter and			Do not operate without cover in place.
			lock wing(s) up.
						Look and listen for rotation. Do not
			RAISED WING CAN FALL AND CRUSH.
						open cover until all components have
			Keep away.
						stopped.
			￿Lock up with wing transport bars.
			Lower wing(s) after transport and for			CONTACT WITH ROTATING PARTS
			storage.
						CAN CAUSE SERIOUS INJURY.
			FAILURE TO FOLLOW INSTRUCTIONS CAN
						15502--B
		18964-A	RESULT IN SERIOUS INJURY OR DEATH.
MAN0963 (2/16/2012)						Safety 13